AConnecting to audio/video input jacks
If your TV, monitor, projector, or other equipment has audio/video (A/V) input jacks, you will get better picture and sound if you connect the recorder using this connection.
Yellow | Yellow |
White (L) | White (L) |
Red (R) | Red (R) |
BConnecting to an antenna input jack
If your TV does not have audio/video (A/V) input jack, connect the recorder to a TV using an antenna cable.
Setting the RF Output channel
When connecting the recorder to the TV using only the antenna cable, you must set the RF Output channel in the “Tuner Preset” so that the TV can receive the correct signal from the recorder.
"/1
TV/VIDEO
1Press "/1 to turn on the recorder.
2Press TV/VIDEO repeatedly until “TV” disappears from the front panel display.
3Turn on your TV and set it to the channel 3. When using channel 4 to receive the recorder signal, see “3, 4 Ch Out” on page 98.
Settings and Hookups
,continued 19