13 Select whether or not you want to send a DTS signal to your amplifier (receiver), and press ENTER.

If your AV amplifier (receiver) has a DTS decoder, select “On.” Otherwise, select “Off.”

14 Press ENTER when “Finish” appears.

Easy Setup is finished. All connections and setup operations are complete.

Easy Setup

10:10 AM

Easy Setup is finished.

 

Finish

To return to the previous display

Press O RETURN.

zHint

If you want to run Easy Setup again, select “Easy Setup” in the “Setup” display (page 107).

Setting Up the VCR Plus+® System

Setting up your recorder involves coordinating the TV channel number (the number you turn to on your TV or recorder to watch a program) with the guide channel (the number that’s assigned to that channel in your TV program guide).

To find the guide channel numbers, look at the “Channel Line-up Chart” in the program guide for your area that features VCR PlusCode numbers. Use the Channel Line-up Chart to coordinate the guide channel number with the TV channel number. For example, if HBO is listed in the Channel Line-up Chart as channel 33, and the recorder receives HBO on channel 5, coordinate these numbers using the following procedure.

Note

To record TV programs using the timer, you must set the clock accurately.

SYSTEM

MENUM/m/</,,

ENTER

ORETURN

1 Press SYSTEM MENU while the recorder is stopped.

Title List(Original)

10:10 AM

Title List

Press ENTER :

Timer

Title Menu for DVD Title List.

Edit

Disc Setting

Setup

32