Step 7: Easy Setup
Follow the steps below to make the minimum number of basic adjustments for using the recorder. If you do not complete Easy Setup, it will appear each time you turn on your recorder. Settings are made in the following order.
OSD Language Setup
m
Clock Setup
m
Tuner and Channel Setup
m
TV Type Setup
m
Audio Connection Setup
m
Finished!
"/1
M/m/</,,
ENTER
O RETURN 
1 Turn on the TV.
2 Press "/1.
The recorder turns on.
3 Switch the input selector on your TV so that the signal from the recorder appears on your TV screen.
“Initial setting necessary to operate the DVD recorder will be made. You can change them later using setup.” appears.
•If this message does not appear, select “Easy Setup” in the “Setup” display to run Easy Setup (page 102).
4 Press ENTER.
The setup display for selecting the language used in the
No Disc Easy Setup
Select the screen language.
English
Français
Español
5 Select a language, and press ENTER.
The setup display for clock setting appears.
No Disc Easy Setup
Select a method for setting the clock.
If you select "Auto", this recorder will look
for a time signal when you turn it off.
Auto
Manual
6 Select “Auto,” and press ENTER.
The recorder will automatically search for a channel that carries a time signal when you turn off the recorder after finishing Easy Setup.
•If broadcasters in your area are not sending time signals, select “Manual,” and press ENTER. Press M/m to set the month and press ,. Set the day, year, hour, minutes, and AM/PM in the same way. The day of the week is set automatically.
22