
Scan Audio (DVDs only)
On | Outputs audio signals during |
| FF1 |
| disc with Dolby Digital |
| soundtracks. |
|
|
Off | No sound is output during |
| FF1 |
|
|
Note
Sound will be interrupted during Scan Audio.
DV/D8 Audio Input
Stereo 1 | Records original sound only. |
| Normally select this when |
| dubbing a DV format tape. |
|
|
Stereo 2 | Records additional audio |
| only. |
|
|
Mix | Records both original and |
| additional sounds. |
|
|
Note
Select “Stereo 2” or “Mix” if you have added a second audio channel when recording with your digital video camera.
Line Audio Input
When recording from equipment connected to the LINE 1 IN or LINE 2 IN jack to a DVD disc in this recorder, select line input audio.
Stereo Records stereo sound only. Select this for discs other than
Main/Sub Records the two different soundtracks on
zHint
Audio selected with the connected equipment is recorded on a disc other than
Recording, Set Top Box Control, and VCR Settings (Features)
The “Features” setup allows you to make set top box control settings or change the tape length, auto play and auto repeat settings.
1 Press SYSTEM MENU while the recorder is in stop mode.
2 Select “Setup,” and press ENTER.
3
Features | 10:10 AM | |
Title List | DVD Auto Chapter | : 5 Min |
| ||
Timer | Format | : VR |
Edit | VCR Function |
|
|
| |
| Synchro Recording | : to DVD |
Dubbing | Set Top Box Control |
|
|
| |
Disc Setting |
|
|
Setup |
|
|
DVD Auto Chapter
Automatically divides a recording (a title) into chapters by inserting chapter markings at specified intervals. The markings are inserted while the recording is being made.
Off | No chapter mark is inserted. |
|
|
5 Min | Inserts chapter marks at |
| approximately 5 minute |
| intervals. |
|
|
15 Min | Inserts chapter marks at |
| approximately 15 minute |
| intervals. |
|
|
Note
Actual intervals may differ depending on the size of the recording. The selected setting should be regarded as an approximate chapter interval.
104