–1

(1) (2)

–2

1
32564
EAhttp://www.sony.co.jp/DSLR/support/
ˎˎ
ˎˎ
1
ˎˎ
ˎˎ
2
ˎˎ
1 2 3 4 *5 6 *
()

1

(1) (2) 2
ˎˎ
(2)

2

ˎˎ
ˎˎ
()
ˎˎ
ˎˎ
ˎˎ
ˎˎ
3DMF
E PZ 18-105mm F4 G OSS
(SELP18105G)
35mm * mm
27-157.5
12-16
*76°-15°
** m 0.45-0.95
0.11
F22
mm 72
mm
78×110
g427
* 35mmAPS-C**
ˎˎ
1 1 1 1 This instruction manual explains how to use lenses. Notes on use are found in the separate “Precautions before using”. Be sure to read both documents before using your lens.This lens is designed for Sony α camera system E-mount cameras. You cannot use it on A-mount cameras.For further information on compatibility, visit the Sony web site in your area, or consult your Sony dealer or local authorized Sony service facility.Notes on Use
When carrying a camera with the lens attached, always firmly
ˎˎ
hold both the camera and the lens.
Some tripod models may interfere with this lens depending on
ˎˎ
the camera or tripod used.
Precautions on using a flash
When using a flash, shoot at least 1m (3.3 feet) away from your
ˎˎ
subject. With certain combinations of lens and flash, the lens
may partially block the light of the flash, resulting in a shadow
at the bottom of the picture.
Vignetting
When using the lens, the corners of the screen become darker
ˎˎ
than the center. To reduce this phenomena (called vignetting),
close the aperture by 1 to 2 stops.
Shake compensation function
For details on setting the shake compensation function, refer
ˎˎ
to the instruction manual supplied with the camera.
Identifying the Parts1 Lens hood index2 Focusing ring3 Zooming ring4 Lens contacts*5 Zoom lever6 Mounting index* Do not touch the lens contacts. Attaching and Detaching the LensTo attach the lens (See illustration .)
1
Remove the rear and front lens caps and the camera body cap.
You can attach/detach the front lens cap in two ways, (1)
ˎˎ
and (2). When you attach/detach the lens cap with the
lens hood attached, use method (2).
2 Align the white index on the lens barrel with
the white index on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks.
Do not press the lens release button on the camera when
ˎˎ
mounting the lens.
Do not mount the lens at an angle.
ˎˎ
To remove the lens (See illustration .)While holding down the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens. Attaching the Lens Hood It is recommended that you use a lens hood to reduce flare and ensure maximum image quality.Align the red line on the lens hood with the red line on the lens (lens hood index), then insert the lens hood into the lens mount and rotate it clockwise until it clicks into place and the red dot on the lens hood is aligned with the red line on the lens.
When using a built-in camera flash or a flash supplied with the
ˎˎ
camera, remove the lens hood to avoid blocking the flash light.
When storing, fit the lens hood onto the lens backwards.
ˎˎ
ZoomingZooming with the zoom leverSlide the lever slightly to zoom slowly and slide it fully to zoom quickly.Zooming with the zooming ringRotate the zooming ring to the desired focal length (zoom position).
We recommend using the zoom lever for muting operation
ˎˎ
noise of the zooming ring while recording movies.
Move the zoom lever with your finger lightly on the lever, to
ˎˎ
prevent wrong operation.
FocusingThere are three ways to focus.Auto focus
ˎˎ
The camera focuses automatically.DMF (Direct manual focus)
ˎˎ
After the camera focuses in auto focus, you can make a fine adjustment manually.Manual focus
ˎˎ
You focus manually.For details on mode settings, refer to the instruction manual supplied with the camera.Specifications
Product name
(Model name)
E PZ 18-105mm F4 G OSS
(SELP18105G)
Equivalent 35mm-format focal
length* (mm)
27-157.5
Lens groups-elements 12-16
Angle of view* 76°-15°
Minimum focus** (m (feet)) 0.45-0.95 (1.48-3.12)
Maximum magnification (X) 0.11
Minimum aperture f/22
Filter diameter (mm) 72
Dimensions (maximum
diameter × height)
(approx., mm (in.))
78 × 110
(3 1/8 × 4 3/8)
Mass (approx., g (oz)) 427 (15.1)
Shake compensation function Yes
* The values shown above for equivalent 35mm-format focal
length and angle of view are for Interchangeable Lens Digital
Cameras equipped with an APS-C sized image sensor.
** Minimum focus is the distance from the image sensor to the
subject.
Depending on the lens mechanism, the focal length may
ˎˎ
change with any change in shooting distance. The focal lengths
given above assume the lens is focused at infinity.
4-475-314-01(1)©2013 Sony CorporationSELP18105G
Interchangeable Lens
Objectif interchangeable
Operating InstructionsMode d’emploiManual de instrucciones
E-mount
Printed in JapanIncluded itemsLens (1), Front lens cap (1), Rear lens cap (1), Lens hood (1), Set of printed documentationDesign and specifications are subject to change without notice. and are trademarks of Sony Corporation.Cette notice explique comment se servir des objectifs. Les remarques sur l’emploi se trouvent dans les « Précautions avant toute utilisation » séparées. Veuillez lire les deux documents avant d’utiliser votre objectif.Votre objectif est conçu pour les appareils photo à monture E de type Sony α. Il ne peut pas être utilisé pour les appareils photo à monture A.Pour plus d’informations sur la compatibilité, consultez le site de Sony de votre pays, ou adressez-vous à un revendeur Sony ou à un service après-vente agréé Sony.Remarques sur l’emploi
Lorsque vous portez un appareil photo avec l’objectif dessus,
ˎˎ
tenez toujours fermement l’appareil photo et l’objectif.
Certains modèles de trépieds peuvent gêner l’objectif selon
ˎˎ
l’appareil photo ou le trépied utilisé.
Précautions concernant l’emploi d’un flash
Si vous utilisez un flash, prenez la photo à au moins 1 m (3,3
ˎˎ
pieds) du sujet. Associé à certains types de flash, l’objectif peut
bloquer partiellement la lumière du flash et produire un ombre
au bas de l’image.
Vignetage
Lorsque l’objectif est utilisé, les coins de l’écran deviennent plus
ˎˎ
sombres que le centre. Pour réduire ce phénomène (appelé
vignetage), fermez l’ouverture de 1 ou 2 crans.
Fonction Antibougé
Pour le détail sur le réglage de la fonction Antibougé, reportez-
ˎˎ
vous au mode d’emploi fourni avec l’appareil photo.
Identification des éléments 1 Repère de parasoleil2 Bague de mise au point3 Bague de zoom4 Contacts de l’objectif *5 Levier de zoom6 Repère de montage* Ne touchez pas les contacts d’objectif. Pose et dépose de l’objectif Pour poser l’objectif (Voir l’illustration .)
1 Déposez les capuchons d’objectif avant et
arrière et le capuchon de l’appareil photo.
Vous pouvez poser et déposer les capuchons d’objectif
ˎˎ
avant de deux façons, (1) et (2). Si vous posez/déposez le
capuchon d’objectif avec le parasoleil, utilisez la méthode
(2).
2 Alignez le repère blanc du barillet d’objectif
sur le repère blanc de l’appareil photo (repère de montage), puis posez l’objectif sur la monture de l’appareil photo et tournez-le dans le sens horaire de sorte qu’il s’encliquette.
N’appuyez pas sur le bouton de libération de l’objectif sur
ˎˎ
l’appareil photo lorsque vous posez l’objectif.
Ne posez pas l’objectif de biais.
ˎˎ
Pour déposer l’objectif (Voir l’illustration .) Tout en appuyant sur le bouton de libération de l’objectif sur l’appareil photo, tournez l’objectif dans le sens antihoraire jusqu’à l’arrêt, puis déposez l’objectif. Fixation du parasoleil Il est conseillé d’utiliser un parasoleil pour réduire la lumière parasite et obtenir la meilleure image possible.Alignez la ligne rouge du parasoleil sur la ligne rouge de l’objectif (repère de parasoleil), puis insérez le parasoleil sur la monture d’objectif et tournez-le dans le sens horaire jusqu’à ce qu’il s’encliquette et le point rouge du parasoleil s’aligne sur la ligne rouge de l’objectif.
Lorsque vous utilisez le flash intégré d’un appareil photo ou le
ˎˎ
flash fourni avec un appareil photo, retirez le parasoleil pour
éviter de bloquer la lumière du flash.
Pour ranger le parasoleil, insérez-le à l’arrière de l’objectif.
ˎˎ
Zooming Zooming avec le levier de zoomPoussez le levier de zoom lentement pour un zoom lent et plus rapidement pour un zoom rapide.Zooming avec la bague de zoomTournez la bague de zoom selon la focale souhaitée (position du zoom.)
Il est conseillé d’utiliser le levier de zoom à la place de la
ˎˎ
bague de zoom pendant l’enregistrement de vidéos pour éviter
d’enregistrer le bruit de la bague.
Déplacez le levier de zoom avec le doigt légèrement appuyé sur
ˎˎ
le levier pour éviter toute mauvaise manipulation.
E PZ 18-105mm F4 G OSS(Suite à la page arrière)