182

Print (Advanced operations)

Print
Specifying DPOF
Using the camera, you can specify the still images before you print images
at a shop or with your printer. Follow the procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
Notes
•You cannot s pecify DPOF on RAW data files.
•You cann ot specify the number of images to be printed.
You can date images when printing them. The position of the date (inside
or outside the image, character size, etc.) depends on your printer.
MENU button t 1 t [Specify Printing] t [Date Imprint] t
[On]
Note
•This function may not be provided, depending on the printer.
1MENU button t 1 t [Specify Printing] t [DPOF Setup]
t [Multiple Img.]
2Select the image with b/B on the control button.
3Check the mark by pressing the center of the control button.
• To unspecify DPOF, select the image again, then press t he center of the
control button.
4Press the MENU button.
5Select [Enter] with v, then press the center of the control
button.

Date Imprint