xDSL Interface

This menu is displayed when Select Network Interface is set to xDSL.

For setting the items in the LAN menu, see “LAN” on page 17.

Network Type

Displays the protocol being used for the xDSL connection or PPPoE (Point-to-Point Protocol over Ethernet).

MAC Address

Displays the MAC address of the camera.

User ID

Type the user ID for Internet connection.

Password

Type the password for Internet connection.

Apply/Cancel/Help

See “Buttons common to every setting page” on page 14.

PSTN Interface

This menu is displayed when Select Network Interface is set to PSTN.

For setting the items in the LAN menu, see “LAN” on page 17.

MAC Address

Displays the MAC address of the camera.

User ID

Type the user ID for Internet connection.

Password

Type the password for Internet connection.

Phone Number

Type the telephone number of the ISP access point.

Connection Timeout For Idle Traffic

Type the duration (in seconds) so that the telephone line is disconnected automatically if there is no data communication during the specified duration.

Dial Tone

Select the dialing type of the telephone line: Tone or Pulse.

Script Enable

Sets if a specified script is required for logging in or not. Select Enable when you use a script; Disable when you do not use it.

Login Script

Select the login script from the drop-down list: End, Wait For, Wait For Prompt, Send, Send CR, Send User ID, Send Password or Delay, and type a required script in the box on the right.

Apply/Cancel/Help

See “Buttons common to every setting page” on page 14.

18 Configuring the Network — Network Setting Page