Activity Detection Threshold
Select the sensitivity of activity detection: Low, Mid, High, Super or Hyper.
The highest sensitivity is given by Hyper, which can detect the smallest movement.
Showing
You can set for displaying “AD” (Activity Detection)
Select On to show a
Notes
•To show the
•The
Output 1
Set up Output 1 of the Sensor I/O port.
Output 1 can output an alarm triggered by the activity detection or manually.
Output Status Control
Select Active to keep Output 1 of the Sensor I/O port usually open and
Alarm
Output Active Duration Time
Type the duration of the output from Output 1 between 1 and 60 seconds.
Lower Half of Sensor I/O Setting Page
Sensor Input (SI)
Set up the sensor input, that is, the input to the Sensor I/ O port on the rear panel of the camera.
Available Alarm Events
Select Enable if you want to output an alarm when the input to the Sensor I/O port is detected, or Disable if you do not want to output an alarm.
Scheduling
Using the boxes below, you can set up to 6 schedules on which the sensor input works.
Select Enable to enable all the schedules whose check boxes you have selected, or Disable to disable them.
Scheduling 1 to Scheduling 6
For each schedule, type the time in hours and minutes when the sensor input starts and ends, and select the check box(es) of the working days of the week.
To enable each schedule you have set, select the check box on the left of Scheduling. You can select multiple schedules.
Note
A schedule across days (ex. 22:00 - 2:00) cannot be set.
Select the level of the input which can be used to trigger an alarm: Low or High.
Input Current Status
Displays the current status of the device connected to the input of the Sensor I/O port.
26 Configuring the Sensor I/O Port — Sensor I/O Setting Page