Connection Using an xDSL Modem
1 Select xDSL (PPPoE) in the setup program or select xDSL on Select Network Interface on the Network Setting page for the Administrator, and set the items for the xDSL modem connection.
For details on the settings, see “xDSL Interface” on page 18.
For the use of the setup program, see “Assigning the IP Address Using the Setup Program” in the supplied Installation Manual.
2 Connect the camera to the network as follows:
AC power adaptor (supplied)
DC IN | ||
12 V | ||
|
Power cord
(supplied)Ethernet cable (not supplied)
to an AC outlet
xDSL Modem
Network
Connection Using a USB Modem
1 Select PSTN in the setup program or select PSTN on Select Network Interface on the Network Setting page for the Administrator, and set the items for the USB modem connection.
For details on the settings, see “PSTN Interface” on page 18.
For the use of the setup program, see “Assigning the IP Address Using the Setup Program” in the supplied Installation Manual.
2 Connect the camera to the network as follows:
AC power adaptor (supplied)
DC IN
12 V USB MODEM
Power cord
(supplied)USB cable (not supplied)
to an AC outlet
USB
USB Modem
Network
Notes
•For details on the xDSL modem connection, refer to the operation manual of the modem.
•For required connection settings, check with your ISP.
Notes
•For details on the USB modem connection, refer to the operation manual of the modem.
•For required connection settings, check with your ISP.
30 Connecting the Camera to a Network