POWER ON/OFF
Hang the hooks on
Hook (L, R)
Battery compartment lid
your ears.

 

 

Neckband

Neckband

 

 

 

 

 

L(Left)
TV/WB/FM SENS
DX/LOCAL
Driver Unit
R(Right)
TUNE +*2/–
VOL*1
Display
Light reflector (R, L)
This reflector reflects car lights at night for your safety.

*1

There is a tactile dot beside volume to show

 

MEGA BASS/CLOCK

BAND
ENTER

 

the direction to turn up the volume.
MODE

*2

The TUNE + button has a tactile dot.
3Press BAND to select the band.

Each press changes the band as follows:

AM FM TV WEATHER

4Press TUNE + or – to select the desired frequency.

If you hold down TUNE + or –, the frequency or channel changes rapidly.

When the frequency matches the broadcast frequency, the broadcast will be received.

5Adjust the volume using VOL.

To turn off the radio, set POWER to OFF.

Improving Radio Reception

TV/WEATHER/FM: Set TV/WB/FM SENS to LOCAL if interference is prevalent when radio wave intensity is dramatically stronger. Under normal conditions, set to DX.

AM: Move around to obtain better reception.

Obtaining Powerful Bass Sound

Press MEGA BASS/CLOCK. “MB” appears in the display.

If the sound is distorted, or if you want to reduce the bass tone, press MEGA BASS/CLOCK again to turn off this function.

The MEGA BASS setting is not canceled even if the radio is turned off.

Presetting your Favorite

Stations — Preset Tuning

You can preset up to 5 stations each for TV, WEATHER and AM, and 15 stations for FM. Also, you can delete the preset station whether it is factory-set or preset by yourself.

Note

If you do not press TUNE + or –, or ENTER within one minute, the preset tuning mode will be canceled.

Tuning in to a Preset Station

1Set POWER to ON to turn on the power.2Press MODE so that “PRESET” and preset number appear.3Select the band with BAND.4Press TUNE + or – to select the desired preset number.

5Adjust the volume using VOL.

To turn off the radio, set POWER to OFF.

Note

If you hold down MODE for more than 2 seconds, the unit enters the preset station deleting mode. Press MODE again to return to the previous mode.

Deleting a Preset Station

1Follow steps 1 and 2 in “Tuning in to a Preset Station”.2Select the band with BAND.3Press TUNE + or – to select the preset number to be deleted.

4Hold down MODE for more than 2 seconds until “PRESET”, “dEL” and the preset number flash.

preset number to be deleted

5While the letters and the preset number are flashing, press
ENTER.

The station set to the preset number just before the deleted station will be displayed.

To delete other stations, repeat steps 2 to 5.

If all the preset stations are deleted, “PRESET -” appears in the display.

To cancel deleting, press MODE while “PRESET”, “dEL” and the preset number are flashing.

Setting the Clock

The clock time display of this unit is a 12-hour system.

When the battery is first installed, “AM 12:00” flashes in the display.

1Set POWER to OFF to turn off the power.

2Hold down MEGA BASS/CLOCK for more than 2 seconds until “AM 12” starts flashing.

3Press TUNE + or – to adjust the hour, then press MEGA BASS/CLOCK.

If you hold down TUNE + or –, the digit changes rapidly. “AM 12:00 ”= midnight, “PM 12:00 ”= noon.

4Repeat step 3 above to adjust the minute.

“:” starts flashing and the clock starts operating.

To set the current time exactly to the second, adjust the minute and then press MEGA BASS/CLOCK to synchronize with a time signal (such as the telephone time signal).

Note

If you do not press TUNE + or –, or MEGA BASS/CLOCK within one minute, the clock setting mode will be canceled.

Changing AM Channel Step

The AM channel step differs depending on areas. The channel step of this unit is factory-set to 10 kHz. Change the settings as shown below to be able to listen to the radio.

Area

Channel step

North and South American countries

10 kHz

Other countries

9 kHz

Note

When the AM channel step is changed, only the preset stations on the AM band will be initialized.

1Set POWER to OFF to turn off the power.

2While holding down MODE, hold down TUNE + or – for more than 5 seconds.

The channel step will change and “9” kHz (or “10” kHz) will flash for 3 seconds in the display.

If you proceed to step 2 again, the channel step changes again.

Playing the Radio — Manual Tuning

1Set POWER to ON to turn on the power.

2If “PRESET” is displayed, press MODE so that “PRESET” disappears.

Pressing MODE will switch over between manual tuning mode and preset tuning mode.

Presetting a Station

1Follow steps 1 to 5 in “Playing the Radio” and manually tune in to the station you wish to preset.

2Hold down ENTER until the preset number flashes.

If there is a preset number that has no preset station, that preset number flashes.

When all the preset numbers are set to certain stations (factory-set), “1” flashes and “PRESET” appears.

3Press TUNE + or – to select the number you wish to preset, then press ENTER.

When you select the preset number using TUNE + or –, “PRESET” appears if that number has a preset station. If it has no preset station, only the number flashes and “PRESET” does not appear.

When you press ENTER, the selected preset number lights up in the display.

Example: Display window when you preset FM 90.0 MHz in preset number 2.

To preset another station, repeat these steps.

To change the preset station, preset a new station. The previous station will be canceled.