Sony SRS-RF930RK manual

2-663-019-12(1)

Hooking up the system

Connecting the transmitter to audio/ video equipment

Set the transmitter by the following steps. Select the hookup depending on the jack type of the

Charging the speaker system battery

Rest the speaker system on the transmitter so that the speaker system's contact pins meet the transmitter's contact points while making sure that

Listening to another audio device connected to the speaker system

You can use this speaker system to listen to a connected CD/MD WALKMAN, etc. by connecting to the AUDIO IN jack using the separately sold RK-G136 connecting cord.

2Open the cabinet of the speaker system and remove the rechargeable battery as illustrated.

Battery

, Change the radio frequency with the CHANNEL

selector on the transmitter, then adjust the TUNE

dial again.

, No sound is heard by wireless transmission.

• If a cord is connected to the AUDIO IN jack of

the speaker system, no sound is heard by

wireless transmission. Disconnect the cord from

the AUDIO IN jack first, and use the TUNE dial

Supplied accessoriesAC adaptor (1)Operating instructions (1)Optional accessories

Connecting cord RK-G129 (Stereo mini plug y

Phono plug ⋅ 2, 1.5 m)

RK-G136 (Stereo mini plug y

Stereo mini plug, 1.5 m)

NPréparatifs

Déballage

Vérifiez que vous disposez de tous les éléments suivants :

Raccordement du transmetteur à une prise de courant à l’aide de l’adaptateur CA fourni.

Transmetteur

Wireless Stereo

audio/video equipment you want to connect the transmitter to.ATo connect to LINE OUT, REC OUT or headphones jackTransmitter

the CHARGE indicator lights in green.Speaker system

Hard Drive Player, Flash Memory Player, Discman, MD, WALKMAN* etc.to headphones, LINE OUT

to adjust the tuning of the speaker system until

sound is heard.

, The speaker system’s POWER indicator light is

turned off.

• Turn on the POWER switch, and turn it off, then

turn it on again.

• Charge the built-in rechargeable battery or if the

POWER indicator is still off after charging the

built-in rechargeable battery, take the speaker

Plug adaptor	PC-236MS (stereo mini jack y
	monaural mini plug)

Design and specifications are subject to change without notice.

Français

AVERTISSEMENT

•Système d’enceinte•Transmetteur•Adaptateur CA

Raccordement du système

Vers la priseDC IN 9 VAdaptateur CA(fourni : AC-S901 )Remarque

Vers une prise de courant

Speaker System

Operating Instructions

Mode d’emploi

Manual de instrucciones

Owner’s Record

The model number is located at the bottom of the transmitter and the rear of the speaker system.

The serial number is located at the bottom of the transmitter and the speaker system.

Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

Model No.
Transmitter		TMR-930
Speaker system		SRS-RF930R
Serial No.
Transmitter
Speaker system

SRS-RF930RK

OFF	ON	B	A DC IN 9V	1 2 3
NOISE FILTER		AUDIO IN		CHANNEL

to AUDIO IN	AUDIO IN A
B jack

Connecting	Audio cord
cord	(AUDIO IN A)
(not supplied)
	Right	to
Left channel	channel	to
Left channel	channel	headphones
(white)	(red)	headphones
(white)	(red)	or LINE OUT
		or LINE OUT
to LINE OUT		jack (stereo
or REC OUT		mini jack)

jacks
Stereo system,	PC, etc.
VCR, etc.

BTo connect to TV, etc.

If noise occurs when the transmitter is connected to the headphone jack of your TV or VCR, set the NOISE FILTER switch to ON.

Transmitter

OFF	ON	B	A DC IN 9V	1 2 3
NOISE FILTER		AUDIO IN		CHANNEL

AUDIO IN A

POWER CHARGE

to an AC outletTransmitter

POWER CHARGE

to an AC outletContact pinContact pointNotes

•While charging the battery, turn off the speaker system.

•Charging is completed in about 16 hours, and the CHARGE indicator goes off.

•Charge the rechargeable battery within a temperature of 0 ˚C to 35 ˚C (32 ˚F to 95 ˚F).

•Do not turn on the speaker system while charging the rechargeable battery. Otherwise, the battery will not be fully charged.

•Do not remove the speaker system from the transmitter until charging is finished.

•If you remove the speaker system from the transmitter and replace, charging will take longer.

•If you remove the speaker system from the transmitter by accident and replace within 5 seconds, charging time will not be affected.

•If you charge the speaker system again after the CHARGE indicator goes off, remove it from the transmitter and replace after about 15 seconds.

•To prolong the life of the rechargeable battery, charge it only after it has been completely used up.

•The life of the built-in rechargeable battery is about 3 years. But it differs depending on operating conditions.

NOperating the system

Listening to a program

or REC OUT jack (stereo mini jack)Connecting cord (not supplied)to AUDIO IN jack

Speaker system

Notes

•When you use the speaker system, remove it from the transmitter.

•Do not use the speaker system while charging the rechargeable battery. Otherwise, the battery life may be shortened.

* “WALKMAN” is a registered trademark of Sony Corporation to represent Headphone Stereo products.

Sending RF signals from the transmitter

The transmitter starts sending the RF signals automatically, when it detects audio signals from the equipment connected.

If it does not detect an audio signal for more than approximately four minutes, the transmitter will stop sending RF signals, and the POWER indicator turns off.

When the transmitter receives an audio signal again, it starts sending the RF signals, and the POWER indicator will light in red again.

If the audio signal is very weak, the transmitter does not send RF signals. If the transmitter is connected to a headphone jack, make sure the volume of the equipment connected is set to 5 – 6 or higher.

You may not hear the beginning of the sound from the speaker system until the transmitter starts

NAdditional information

Precautions

Notes on the AC power adaptor

•Plug the AC power adaptor into a nearby AC output. In case of a problem, unplug from the AC outlet immediately.

•Do not place the AC power adaptor on a bookshelf or in a confined place such as a cabinet.

•Do not use the AC power adaptor in a place subject to liquid or moisture to avoid fire or electric shock. Furthermore, do not place liquid- filled vessels, such as a vase, etc., on the AC power adaptor.

•When the transmitter is not to be used for a long period of time, disconnect the AC power adaptor from the AC outlet holding the plug. Do not pull on the cord.

Notes on the location you set the speaker system•Do not leave the wireless speaker system in a location subject to:

–Direct sunlight or extremely high temperature such as near a heater or in a car with its windows closed.

–High humidity such as in a bathroom.

–Excessive dust or sandy places.

•The speaker system is magnetically shielded, but do not put a recorded tape, watch, cash card or floppy disk in front of the speaker system.

•Set up the speaker system on a flat surface.Notes on charging the battery

• When you charge the rechargeable battery, use

the supplied transmitter only.

• The charging time differs depending on usage

conditions of the battery.

• When you use the battery for the first time or the

battery has not been used for a long time, the

battery duration time may become shorter than

the usual duration time. However, after you

charge the battery several times, the battery

duration time returns to its normal condition.

• If the battery duration time becomes half of its

normal time even after the battery is charged

system to a Sony dealer for replacement of the

rechargeable battery.

, If you connect the transmitter to the LINE OUT or

REC OUT jack of an audio reproducer, make sure

that the NOISE FILTER switch is set to OFF.

, Make sure that the NOISE FILTER switch is set to

either ON or OFF. (If the switch gets stuck

between ON and OFF, the sound will be cut off.)

Distortion

,If the transmitter is connected to the headphones jack, turn down the volume of the connected audio/video equipment. If the connected audio/ video equipment has BASS BOOST function, set its function to OFF.

,If the connected audio/video equipment has a LINE OUT jack, connect its LINE OUT jack.

,Change the radio frequency with the CHANNEL selector on the transmitter, then adjust the TUNE dial again.

,The speaker system’s POWER indicator light is turned off.•Turn on the POWER switch, and turn it off, then turn it on again.

•Charge the built-in rechargeable battery or if the POWER indicator is still off after charging the built-in rechargeable battery, take the speaker system to a Sony dealer for replacement of the rechargeable battery.

,If you connect the transmitter to LINE OUT or REC OUT jack of an audio reproducer, make sure that the NOISE FILTER switch is set to OFF.

Loud background noise

, Move closer to the transmitter. As you move

away from the transmitter, more noise is likely to

be heard.

, If the transmitter is connected to the headphones

jack, turn up the volume of the connected audio/

video equipment.

, Change the radio frequency with the CHANNEL

selector on the transmitter, then adjust the TUNE

dial again.

, The speaker system’s POWER indicator light is

turned off.

• Turn on the POWER switch, and turn it off, then

turn it on again.

• Charge the built-in rechargeable battery or if the

POWER indicator is still off after charging the

built-in rechargeable battery, take the speaker

Pour éviter tout risque d’incendie ou de choc électrique, n’exposez pas l’appareil à la pluie ou à l’humidité.

Pour prévenir tout risque d’électrocution, n’ouvrez jamais le coffret. Adressez-vous à un personnel qualifié uniquement pour toute intervention sur l’appareil.

Avertissement

Soyez avisé que toute modification non expressément approuvée dans le présent mode d’emploi pourrait entraîner l’annulation de vos droits d’utilisation de ce produit.

Pour les utilisateurs au Canada

Son utilisation est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioeléctrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.

Pour les utilisateurs aux Etats-Unis et au CanadaRECYCLAGE DES ACCUMULATEURS À HYDRURE MÉTALLIQUE DE NICKELLes accumulateurs à hydrure métallique de nickel sont recyclables.

Vous pouvez contribuer à préserver l’environnement en rapportant les piles usées dans un point de collection et recyclage le plus proche.

Pour plus d’informations sur le recyclage des accumulateurs, téléphonez le numéro gratuit 1-800-822-8837 (Etats-Unis et Canada uniquement), ou visitez http://www.rbrc.org/

Avertissment : Ne pas utilliser des accumulateurs à hydrure métallique de nickel qui sont endommagées ou qui fuient.

Bienvenue !

Raccordement du transmetteur à un appareil audio ou vidéo

Installez le transmetteur en effectuant les étapes suivantes. Choisissez le raccordement à effectuer selon le type de prise de l’appareil audio ou vidéo auquel vous souhaitez raccorder le transmetteur.

ARaccordement à une prise LINE OUT, REC OUT ou une prise de casque.

Transmetteur

OFF	ON	B	A DC IN 9V	1 2 3
NOISE FILTER		AUDIO IN		CHANNEL

Vers la prise		AUDIO IN A
AUDIO IN B

Cordon de	Cordon audio
raccordement	(AUDIO IN A)	Vers la prise
(non fourni)		Vers la prise
		de casque ou
		LINE OUT
Canal gauche	Canal droit	(mini-prise
Canal gauche	Canal droit	stéréo)
(blanc)	(rouge)

Vers les prisesLINE OUT ouREC OUTOrdinateur, etc.

B Raccordement à un téléviseur ou à un

autre appareil.

Utilisez uniquement l’adaptateur CA fourni. N’utilisez aucun autre adaptateur CA afin de ne pas endommager le transmetteur.

Polarité de la fiche

Recharge de la batterie du système d’enceinte

Placez le système d’enceinte sur le transmetteur de sorte que les broches de contact du système d’enceinte touchent les points de contact du transmetteur tout en vous assurant que le témoin CHARGE s’allume en vert.

Système d’enceinte

POWER CHARGE

Vers une prise deTransmetteur courant

POWER CHARGE

Vers une prise decourantBroche de contactPoint de contactRemarques

• Lors de la mise en charge de la batterie, mettez le

système d’enceinte hors tension.

English

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Information

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

For the Customers in the U.S.A.If you have any questions about this product, you may call;Sony Customer Information Services Center 1-800-222-7669 or http://www.sony.com/Declaration of Conformity

Trade Name:	SONY
Model No.:	SRS-RF930R
Responsible Party:	Sony Electronics Inc.
Address:	16530 Via Esprillo,
	San Diego, CA 92127 USA
Telephone No.:	858-942-2230

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For the Customers in Canada

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

For the customers in the USA and CanadaRECYCLING NICKEL METAL HYDRIDE BATTERIES

Nickel Metal Hydride batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.

For more information regarding recycling of rechargeable batteries, call toll free

1-800-822-8837, or visit http://www.rbrc.org/Caution: Do not handle damaged or leaking Nickel Metal Hydride batteries.

Welcome!

Thank you for purchasing the Sony SRS-RF930RK Wireless Stereo Speaker System. Before operating the unit, please read this manual thoroughly and retain it for future reference. Some features are:

•Wireless system that allows you to use your system free from the restriction of speaker cords. Wide signal reception range up to about 150 feet (46 m).

•This speaker system can be powered with builtin rechargeable battery for perfect wireless speaker system.

•Smart battery charge system on transmitter. •One-box stereo type speaker for easy to carry and

setting in any room or anywhere.•2 inputs on transmitter for connecting PC and other audio equipments.

•1 analog input on main unit to connect directly other portable audio equipment.

•Manual tuning function available on speaker.

Notes on receiving performance

The system for this equipment utilizes very high frequency signals in the 900 MHz band so the receiving performance may deteriorate due to the surroundings. The following examples illustrate conditions that may reduce the possible receiving range or cause interference with reception.

•Inside a building with walls containing steel beams.•Area with many steel file cabinets, etc.

•Area with many electrical appliances capable of generating electromagnetic noise.

•Transmitter is placed on a metal instrument.•Area facing roadways.

•Noise or interfering signals exist in the surroundings due to radio transceivers in trucks, etc.

•Noise or interfering signals exist in the surroundings due to wireless communication systems installed along roadways.

•Transmitter is placed directly on floor. Placing it up off the floor, such as on a desk, is recommended.

NGetting started

Unpacking

Check that you have the following items:•The speaker system•The transmitter•AC power adaptor

Audio cord (AUDIO IN A)to headphones or LINE OUT jack (stereo mini jack)TV, etc.

Notes

•If you connect the transmitter to LINE OUT or REC OUT jack, do not set the NOISE FILTER switch to ON. Otherwise, the volume will be limited.

•The NOISE FILTER switch is effective only in case of connection using AUDIO IN A.

•When the transmitter is placed on or near a TV, it may pick up a noise. In such case, place the transmitter away from the TV.

•When you connect the connecting cord directly to an earphone jack, the audio signal will not be output through the right channel. In such a case, use the separately sold PC-236MS plug adaptor.

•If the connected equipment has the AVLS (Automatic Volume Limiter System) function, be sure to turn the function off when using the transmitter. Otherwise, you will have to turn up the volume of the speaker system, and that may cause noise.

•If the connected equipment has the BASS BOOST or MEGA BASS function, be sure to turn the function off when using the transmitter. Otherwise, the sound from the speaker system may be distorted.

•Do not place the transmitter near a fluorescent lamp, etc. when using the system.

Connecting the transmitter to an AC outlet using the supplied AC power adaptor

Transmitter

To DC IN 9 V jack

to an AC outlet

AC power adaptor (supplied: AC-S901)Note

Use only the supplied AC power adaptor. Do not use any other AC power adaptor to avoid damaging the transmitter.

Polarity of the plug

Before using the speaker system, charge the builtin rechargeable battery first.

Turn down the volume of the speaker system before playing back a program on the connected audio/video equipment.

Listening to a program from the transmitter by wireless transmissionTUNE dial

POWER switch	AUDIO IN
POWER indicator	VOLUME control

1First turn on the audio/video equipment and start playing.The POWER indicator of the transmitter will light up.2Turn on the speaker system.The POWER indicator of the speaker system will light in red.3Select the radio frequency with the CHANNEL selector.

1 2 3

CHANNEL

Note

If you use the unit near a cordless telephone, it may cause radio interference. If poor reception occurs, try another channel using the CHANNEL selector.

4Use the TUNE dial to adjust the tuning of the speaker system.Use the VOL control to adjust the volume.

Notes

•When the POWER indicator of the speaker system does not light up, or if it turns off immediately, charge the rechargeable battery.

•Do not place the transmitter and the speaker system near any metal instrument. Otherwise, the receiving range from the transmitter may be reduced.

sending the RF signals after detecting an audio signal.

Notes

•If the transmitter is connected to the headphones jack of the source equipment, set the volume of that equipment as high as possible without distorting the audio signal.

•If a hissing noise is heard, move it closer to the transmitter.

•If you hold the antenna of the transmitter with your hand, noise may occur. But this is not a malfunction.

The effective areas of the transmitter

The optimum distance is up to approximately 150 feet (46 m) without the system picking up some interference. However, the distance may vary according to the surroundings and environment. If the system picks up some noise while using it within the above mentioned distance, reduce the distance between the transmitter unit and the speaker system, or select another channel.

Notes

•When you use the speaker system within the effective areas of the transmitter, the transmitter can be placed in any direction from the listener.

•Even within the signal reception area, there are some spots (dead spot) where the RF signal cannot be received. This is a characteristic inherent to RF signals, and does not indicate malfunction. By slightly moving the transmitter, location of the dead spot can be changed.

Disposing of the speaker system

Be sure to remove the built-in rechargeable battery from the speaker system before you dispose of the speaker system.

1Remove 8 screws from the speaker system using a cross-point screw driver as illustrated below.

fully, the battery is worn out. In this case,

consult your nearest Sony dealer.

Notes on using the speaker system•Do not disassemble the speaker unit, built-in amplifier or cabinet.•Do not insert an object into the jack. Doing so may cause a malfunction.•Keep the volume at a moderate level to prevent distortion.

•Do not touch the contact points of the transmitter or the contact pins of the speaker system with any metal object, otherwise a short circuit may occur.

•If the contact points or the contact pins are dirty, charging may not occur. Clean them regularly with a soft cloth, etc., taking care not to damage the contact pins.

Note on cleaning

Clean the cabinet of the speaker system with a soft cloth slightly moistened with water or a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzene as it may mar the finish of the cabinet.

When the color of your monitor screen becomes irregular

Because this speaker system is magnetically shielded, you can set it up near a monitor. But depending on the model of the monitor, color irregularity may occur.

To correct the color irregularTurn off the monitor, and then turn it on again after 15 to 30 minutes.If color irregularity remains after performing the above•Separate the monitor and the speaker system.

•Make sure that no magnetic object, such as may be attached to a door of shelf, healthcare device or toys, etc., is located near the speaker system.

If you have any questions or problems concerning the system that are not covered in this manual, please consult your nearest Sony dealer.

Be sure to bring the speaker system and the transmitter to the Sony dealer when requiring repair work.

Troubleshooting

No sound/Muffled sound,Check the connection of the audio/video equipment.,Check that the audio/video equipment is turned on.

,Turn up the volume on the connected audio/ video equipment, if the transmitter is connected to the headphones jack.

system to a Sony dealer for replacement of the

rechargeable battery.

, If you connect the transmitter to the LINE OUT or

REC OUT jack of an audio reproducer, make sure

that the NOISE FILTER switch is set to OFF.

The CHARGE indicator does not light up even though the speaker system sits on the transmitter

,Remove the speaker system from the transmitter, then replace it after 15 seconds.

,The speaker system is not placed correctly on the transmitter.,Place the speaker system in the correct orientation onto the transmitter.,The speaker system is placed backwards on the transmitter.

,Clean the contact pins of the speaker system and the contact points of the transmitter with a soft cloth.

The battery duration time is short

,If you use the battery under the temperature lower than 0 ˚C (32 ˚F), this is not a malfunction.

,The battery life may end. If the battery duration time becomes half of its normal time even after the battery is charged fully, consult your nearest Sony dealer.

Specifications

General

Carrier frequency	913.5, 914, 914.5 MHz
Channel	Ch1, Ch2, Ch3
Modulation	FM stereo
Transmitter
Power source	DC 9 V: supplied AC power adaptor
	(AC-S901)
Audio input	Input cord - stereo mini plug
	(1.5 m)/stereo mini jack
Input impedance	27 kΩ /50 Ω at 1 kHz
Dimensions	Approx. 120 ⋅ 107 ⋅ 123 mm
Mass	(4 3/4 ⋅ 4 1/4 ⋅ 4 7/8 in.) (w/h/d)
Mass	Approx. 192 g (6.8 oz.)
Speaker system
Speaker system	Full range, Bass reflex, magnetically
	shielded
Speaker Unit	57 mm (diameter)
Rated output	2 W
Audio input	stereo mini jack
Input impedance	5.9 kΩ at 1 kHz
Dimensions	Approx. 366 ⋅ 120 ⋅ 86 mm
Mass	( 14 1/2 ⋅ 4 3/4 ⋅ 3 1/2 in.) (w/h/d)
Mass	Approx. 905 g (31.9 oz.) incl.
	built-in rechargeable battery
Built-in Ni-MH rechargeable battery
Voltage	4.8 V
Capacity	700 mAh
Duration time	Approx. 14 hours*
Charging time	Approx. 16 hours (from fully
	discharged to fully charged)

* at 5 mW + 5 mW output

Nous vous remercions d’avoir fait l’acquisition du système d’enceinte stéréo sans fil SRS-RF930RK de Sony. Avant de faire fonctionner cet appareil, lisez attentivement le présent mode d’emploi et conservez-le pour toute référence ultérieure.

Cet appareil offre, entre autres, les caractéristiques suivantes :

•Système sans fil permettant l’utilisation de votre système sans être limité par le cordon des enceintes.

•Longue portée de réception des signaux allant jusqu’à environ 46 m (150 pi.).

•Ce système d’enceinte peut être alimenté par une batterie rechargeable intégrée afin d’obtenir un système d’enceinte sans fil parfait.

•Système intelligent de recharge de la batterie sur le transmetteur.

•Enceinte de type stéréo à boîtier unique facile à transporter et permettant une installation dans n’importe quel endroit.

•2 entrées sur le transmetteur permettent de raccorder un ordinateur, ainsi que d’autres équipements audio.

•1 entrée analogique sur l’appareil principal permet de raccorder directement un autre équipement audio portatif.

•Fonction de syntonisation manuelle disponible sur l’enceinte.

Remarques sur la qualité de transmission

Comme le système de cet appareil utilise des signaux de très haute fréquence dans la bande des 900 MHz, l’environnement de l’appareil peut entraîner une détérioration de la qualité de transmission. Les exemples suivants illustrent les situations pouvant réduire la plage de transmission et perturber la réception.

•Utilisation à l’intérieur d’un bâtiment à structure en acier.

•Utilisation dans des pièces contenant de nombreux classeurs ou autres éléments en acier.

•Utilisation à proximité d’un grand nombre d’appareils électriques générant des parasites électromagnétiques.

•Installation du transmetteur sur un instrument métallique.•Utilisation à proximité d’une route.

•Parasites ou interférences autour de l’appareil, provenant d’émetteurs-récepteurs de camions ou d’autres appareils.

•Parasites ou interférences autour de l’appareil, provenant de systèmes de communication sans fil installés le long des routes.

•Installation du transmetteur directement sur le sol. Il est recommandé d’installer le transmetteur en hauteur, par exemple sur un bureau.

Si des parasites sont audibles lorsque le

transmetteur est relié à la prise de casque

de votre téléviseur ou magnétoscope,

réglez le commutateur NOISE FILTER à

ON.

Transmetteur

OFF	ON	B	A DC IN 9V	1 2 3
NOISE FILTER		AUDIO IN		CHANNEL

AUDIO IN A

Cordon audio (AUDIO IN A)

Vers la prise de casque ou LINE OUT (mini-prise stéréo)

Téléviseur ou autre appareil

Remarques

•Si vous raccordez le transmetteur à une prise LINE OUT ou REC OUT, ne réglez pas le commutateur NOISE FILTER à ON, sinon le volume sera limité.

•Le commutateur NOISE FILTER est uniquement activé lors d’une connexion avec AUDIO IN A.

•Placé près d’un téléviseur, le transmetteur risque de subir des interférences. Le cas échéant, éloignez-le du téléviseur.

•Lorsque vous raccordez directement le cordon de raccordement à une prise de casque, le signal audio n’est pas émis par le canal droit. Dans ce cas, utilisez l’adaptateur de fiche PC-236MS vendu séparément.

•Si l’appareil raccordé est équipé de la fonction AVLS (système de limitation automatique du volume), désactivez cette fonction lorsque vous utilisez le transmetteur. Sinon, vous devrez augmenter le volume du système d’enceinte, ce qui pourrait engendrer des parasites.

•Si l’appareil raccordé est équipé de la fonction BASS BOOST ou MEGA BASS désactivez cette fonction lorsque vous utilisez le transmetteur. Sinon, le son provenant du système d’enceinte risque d’être déformé.

•N’installez pas le transmetteur près d’une lampe fluorescente, etc. lorsque vous utilisez le système.

• Le chargement complet s’effectue en 16 heures environ

et le témoin CHARGE s’éteint.

• Rechargez la batterie rechargeable à une température

supérieure à 0 ˚C et inférieure à 35 ˚C (32 ˚F à 95 ˚F).

• Ne mettez le système d’enceinte sous tension lors de la

mise en charge de la batterie. Sinon, la batterie risque de

ne pas être entièrement rechargée.

• Ne retirez pas le système d’enceinte du transmetteur

avant que la recharge ne soit terminée.

• Si vous retirez le système d’enceinte du transmetteur,

puis que vous le remettez en place, la recharge sera plus

longue.

• Si vous retirez accidentellement le système d’enceinte

du transmetteur, puis que vous le remettez en place

dans les 5 secondes, le temps de charge ne sera pas

affecté.

• Si vous chargez de nouveau le système d’enceinte après

l’extinction du témoin CHARGE, retirez-le du

transmetteur, puis remettez-le en place après environ

15 secondes.

• Pour prolonger la durée de vie de la batterie

rechargeable, chargez-la uniquement lorsqu’elle est

complètement vide.

• La durée de vie de la batterie rechargeable intégrée est

d’environ trois ans, mais elle peut être plus ou moins

longue selon les conditions d’utilisation.

NUtilisation du système

Écoute d’un programme

Avant d’utiliser le système d’enceinte, rechargez la batterie rechargeable intégrée.

Baissez le volume du système d’enceinte avant de commencer à écouter un programme à partir de l’appareil audio ou vidéo raccordé.

Écoute d’un programme à partir du transmetteur, par l’entremise d’une transmission sans fil

Molette TUNE

	Commutateur	AUDIO IN
	POWER	Commande
	Témoin POWER	Commande
	Témoin POWER	VOLUME
		VOLUME

1Mettez d’abord l’équipement audio et vidéo sous tension et démarrez la lecture.

Le témoin POWER du transmetteur s’allume.2Mettez le système d’enceinte sous tension.Le témoin POWER du système d’enceinte s’allume en rouge.Voir page suivante