This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
For the customers in CanadaThe Class A digital apparatus meets all requirements of the Canadian
CAUTION:
These potential hazards shall be considered common to most rack installation.
1)Elevated Operating Ambient Temperature
After installed, the operating temperature may be greater than room ambient. Consideration shall be given to the environment temperature compatible within the Manufacturer’s specified limit of Ambient Temperature of 0°C – +35°C.
2)Reduced Air Flow
After installed, the amount of air flow required for safe operation of this equipment shall not compromised.
3)Circuit Overloading
Before installing, refer to rated current on this equipment and make sure that no overloading to the supply circuit on the rack.
Please confirm the rated current described on this Operating Instructions.
4)Providing Protective Earth
When this product is installed in a rack and supplied power from an outlet on the rack, please confirm that the outlet is provided with a reliable protective earth connection.
5)Prevention against achieving hazardous condition due to uneven mechanical loading
When this product is in a rack, please make sure that the rack does not achieve hazardous condition due to uneven mechanical loading.
3