System Speaker the Up Setting and Up Hooking

Speaker System Hookup

Selecting the impedance

Set the IMPEDANCE SELECTOR for the speakers as indicated in the table below. Check the instruction manual of your speakers if you’re not sure of the impedance. (This information is usually printed on a label on the back of the speaker.)

If the nominal impedance of

Set IMPEDANCE SELECTOR to

your speaker is

 

 

 

Between 4 and 8 ohms

4Ω

 

 

8 ohms or higher

8Ω

 

 

Note

Be sure to connect front speakers with a nominal impedance of 8 ohms or higher if you want to select both sets (A+B) of front speakers (see page 23).

Multi-Channel Surround Setup

For the best possible surround sound all speakers should be the same distance from the listening position (A). (However, this unit lets you to place the center speaker up to 1.5 meters closer (B) and the rear speakers up to 15 feet (4.5 meters) closer (C) to the listening position.

The front speakers can be placed from 3 to 40 feet (1.0 to 12.0 meters) from the listening position (A).)

B

A A

45°

C

C

90°

20°

Note

Do not place the center or rear speakers farther away from the listening position than the front speakers.

14