Additional Information
Specifications
Amplifier section
Outputs | MD/TAPE REC OUT: |
| Voltage: 150 mV, |
| Impedance: 10 kilohms |
| VIDEO AUDIO OUT: |
| Voltage: 150 mV, |
| Impedance: 10 kilohms |
AM tuner section
Tuning range Australia, Singapore and Malaysia models:
531 - 1602 kHz (9 kHz step)
Rated Power
Output at Stereo
Mode
Reference Power Output
Frequency response
Inputs
Canada model:
(8 ohms 20 Hz - 20 kHz, less than 0.09% total harmonic distortion)
Australia, Singapore and Malaysia models:
(8 ohms at 1 kHz, THD 0.7%)
Other countries:
(8 ohms at 1 kHz, THD 0.7%)
Canada model:
(8 ohms at 1 kHz, THD 0.7%)
Front:
Other countries:
(8 ohms at 1 kHz, THD 10%)
Front:
TV/SAT, CD, MD/TAPE,
VIDEO, 5.1 CH/DVD: 10 Hz - 50 kHz +0.5 dB
| SUB WOOFER: |
| Voltage: 2 V |
| Impedance: 1 kilohms |
| PHONES: Accepts low |
| and high impedance |
| headphones |
Muting | Full mute |
BASS BOOST | +6 dB at 70 Hz |
TONE | ±6 dB at 100 Hz and |
| 10 kHz |
Tuner section
FM stereo, FM/AM superheterodyne tuner FM tuner section
Tuning range | 87.5 - 108.0 MHz |
Antenna terminals 75 ohms, unbalanced
Intermediate | 10.7 MHz |
frequency |
|
Sensitivity | Mono: 18.3 dBf, 4.5 µV |
| Stereo: 38.3 dBf, 45 µV |
Usable sensitivity | 11.2 dBf, 1 µV (IHF) |
S/N | Mono: 76 dB |
| Stereo: 70 dB |
Harmonic | Mono: 0.3 % |
distortion at | Stereo: 0.5 % |
1 kHz |
|
Separation | 45 dB at 1 kHz |
Frequency | 30 Hz - 15 kHz +0.5dB |
response | |
| |
Selectivity | 60 dB at 400 kHz |
Canada model:
530 - 1710 kHz (10 kHz step)*
531 - 1710 kHz (9 kHz
| step) |
| Other countries models: |
| 530 - 1610 kHz (10 kHz |
| step)* |
| 531 - 1602 kHz (9 kHz |
| step) |
Antenna | Loop antenna |
Intermediate | 450 kHz |
frequency |
|
Usable sensitivity | 50 dB/m (at 999 kHz) |
S/N | 54 dB (at 50 mV/m) |
Harmonic | 0.5 % (50 mV/m, 400 Hz) |
distortion |
|
Selectivity | At 9 kHz: 35 dB |
| At 10 kHz: 40 dB |
*You can change the AM tuning interval between 9 kHz and 10 kHz. Turn off the receiver and press ?/1 (power) for more than 4 seconds until “INITIAL” appears.
1)After tuning in any AM station, turn off the receiver.
2)Hold down PRESET TUNING + button and press the ?/1 (power) button. “9k STEP” appears.
To change to 10k Step, repeat step 1 and 2 until “10k STEP” appears. Note that all preset stations, index names and sound field are cleared after you make the procedure above.
Sensitivity | Impedance | S/N | |
|
|
|
|
CD, |
|
|
|
5.1 CH/ |
|
|
|
DVD, | 150 mV | 50 | 85 dB |
MD/TAPE, | kilohms |
TV/SAT,
VIDEO
20US