Getting Started
AC Hookups
Setting the voltage selector (except for Singapore, Malaysia, Canada and Australia models)
Check that the voltage selector on the rear panel of the player is set to the local power line voltage. If not, set the selector to the correct position using a screwdriver
Before You Use Your Receiver
Before turning on the receiver, make sure that you have:
• Set the SPEAKERS button to ON.
Before you use your receiver for the first time or when you want to clear the receiver's memory, do the procedure below:
before connecting the AC power cord to a wall outlet.
120 V 240 V 220 V
Connecting the AC power cord
Connect the AC power cord from this receiver and from your audio/video components to a wall outlet.
?/1 (power)
DIMMER
MUTING
VOLTAGE SELECTOR
(except Singapore, Malaysia, Canada and Australia models)
,
to a wall outlet
Where do I go next?
Before you use the receiver, go to the next section to make sure that all the controls are set to the appropriate positions.
1Turn off the receiver.
2Press ?/1 (power) for more than 4 seconds. “INITIAL” appears in the display and the items including the following are reset or cleared:
•All preset stations are reset to their factory settings.
•All sound field parameters are reset to their factory settings.
•All index names (of preset stations and program sources) are cleared.
•All adjustments made with the SET UP button are reset to their factory settings.
•The sound field memorized for each program source and preset station is cleared.
Turn on the receiver and check the following indicator.
•Press MUTING if the MUTING indicator turns on.
•Press DIMMER repeatedly to set the display at any of four levels of brightness.
9US