35GB
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STR-
DH820-CEL.fm
masterpage: Right
STR-DH820
4-266-497-11(2)
Preparing the Receiver
3Press V/v repeatedly to select
“Speaker”, then press or b.
4Press V/v repeatedly to select
“SP Pattern”, then press or
b.
5Press V/v repeatedly to select
the speaker pattern you want,
then press .
6Press RETURN/EXIT O.
You can switch the usage of the speaker(s)
connected to the SPEAKERS SURROUND
BACK/FRONT HIGH/BI-AMP/FRONT B
terminals in accordance with the intended use.
Notes
•This setting is only available if the “SP Pattern” is
set to a setting without surround back and front
high speakers.
•Be sure to set the “SB Assign” before you perform
Auto Calibration.
1Press GUI MODE.
After “GUI ON” appears on the display
panel for a while, the GUI menu appears
on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2Press V/v repeatedly to select
“ Settings”, then press or
b.
The Settings menu list appears on the TV
screen.
3Press V/v repeatedly to select
“Speaker”, then press or b.
4Press V/v repeatedly to select
“SB Assign”, then press or
b.
5Press V/v repeatedly to select
the parameter you want, then
press .
•Speaker B: If you connect an additional
front speaker system to the SPEAKERS
SURROUND BACK/FRONT HIGH/
BI-AMP/FRONT B terminals, select
“Speaker B”.
•BI-AMP: If you connect front speakers
to the SPEAKERS SURROUND
BACK/FRONT HIGH/BI-AMP/
FRONT B terminals using a bi-
amplifier connection, select “BI-AMP”.
•OFF: If you connect surround back or
front high speakers to the SPEAKERS
SURROUND BACK/FRONT HIGH/
BI-AMP/FRONT B terminals, select
“OFF”.
6Press RETURN/EXIT O.