— Playback – Basics —

Playing back a tape

You can monitor the playback picture on the LCD screen. If you close the LCD panel, you can monitor the playback picture in the viewfinder. You can control playback using the Remote Commander supplied with your camcorder.

(1) Install the power source and insert the recorded tape.

(2) Set the POWER switch to VCR while pressing the small green button. The video control buttons light up.

(3) To open the LCD panel, press OPEN.

(4) Press m to rewind the tape.

(5) Press N to start playback.

(6) To adjust the volume, press either of the two buttons on VOLUME. The speaker on your camcorder is silent when the LCD panel is closed.

2

VCR

4

 

5

 

 

OFF

REW

PLAY

 

 

(

 

 

 

CHG

 

 

 

CAMERA MEMORY

)

 

 

 

 

 

 

6

3

VOLUME

 

1

To stop playback

Press x.

When monitoring on the LCD screen

You can turn the LCD panel over and move it back to the camcorder body with the LCD screen facing out.

Basics – Playback

25