Using the fader function

(1) When fading in [a]

In the standby mode, press FADER until the desired fader indicator flashes.

When fading out [b]

In the recording mode, press FADER until the desired fader indicator flashes. The indicator changes as follows:

FADER t M.FADER* t BOUNCE* t MONOTONE t OVERLAP t WIPE t DOT t no indicator

The last selected fader mode is indicated first of all.

(2) Press START/STOP. The fader indicator stops flashing.

* DCR-TRV6/TRV11 only

1

FADER

FADER

To cancel the fader function

After the fade in/out is carried out : Your camcorder automatically returns to the normal mode.

Before the fade in/out is carried out : Before pressing START/STOP, press FADER until the indicator disappears.

Note

You cannot use the following functions while using the fader function. Also, you cannot use the fader function while using the following functions:

Digital effect

Low lux mode of PROGRAM AE (Overlap, Wipe, or Random Dot function only)

Super NightShot

Tape Photo recording

When the OVERLAP, WIPE, or RANDOM DOT indicator appear in the standby mode Your camcorder automatically stores the image recorded on a tape. As the image is being stored, the indicators flash fast, and the playback picture disappears. At this stage, the picture may not be recorded clearly, depending on the tape condition.

While using the bounce function, you cannot use the following functions (DCR- TRV6/TRV11 only):

– Exposure

– Focus

– Zoom

– Picture effect

Note on the bounce function (DCR-TRV6/TRV11 only)

The BOUNCE indicator does not appear in the following mode or functions:

– D ZOOM is activated in the menu settings

– 16:9 wide

– Picture effect

– PROGRAM AE

36

While in memory mode (DCR-TRV11/TRV20 only)

You cannot use the fader function.