Loading Media Changer | Unloading Media Changer | |
|
| |
1 Make sure the Changer/Recorder is | To eject discs using Media Center: | |
properly connected to the Personal | 1 From Media Center, go to My | |
Computer and is turned on. | ||
Note: When loading discs, make | Changer and select Manage Discs. | |
2 Select the Eject button associated | ||
sure that the label is facing to the | ||
right of the slot. | with the disc you want to eject. | |
2 To load a single disc, press the | To eject discs manually: | |
Load button once and insert the | 1 Press the Eject button one time to | |
disc. To load multiple discs, press | ||
eject the last inserted disc. | ||
the Load button twice and insert | ||
| ||
each disc in the slot one at a time. | or | |
The changer keeps rotating open | 2 Press the Eject button two times to | |
slots until all are filled or no until no | ||
eject all discs in the changer slots. If | ||
disc is inserted after 15 seconds. | ||
the disc is not removed from the slot, | ||
3 Once the discs have been inserted, | ||
the eject process will time out and | ||
they must be scanned by Media | stop after approximately 10 seconds. | |
Center before they can be viewed. | Note: This will not eject the disc in | |
Go to More Programs and select | ||
the changer optical drive. You must | ||
Manage Discs or to My DVDs | ||
go to Media Center to eject the last | ||
4 Click Yes on the NEW DISCS | ||
disc. See steps 1 through 2 of To | ||
FOUND message to update your | eject discs using Media Center. | |
library with the new disc information. |
| |
|
|
Note: For addional information about the
132