Loading Media Changer

Unloading Media Changer

 

 

1 Make sure the Changer/Recorder is

To eject discs using Media Center:

properly connected to the Personal

1 From Media Center, go to My

Computer and is turned on.

Note: When loading discs, make

Changer and select Manage Discs.

2 Select the Eject button associated

sure that the label is facing to the

right of the slot.

with the disc you want to eject.

2 To load a single disc, press the

To eject discs manually:

Load button once and insert the

1 Press the Eject button one time to

disc. To load multiple discs, press

eject the last inserted disc.

the Load button twice and insert

 

each disc in the slot one at a time.

or

The changer keeps rotating open

2 Press the Eject button two times to

slots until all are filled or no until no

eject all discs in the changer slots. If

disc is inserted after 15 seconds.

the disc is not removed from the slot,

3 Once the discs have been inserted,

the eject process will time out and

they must be scanned by Media

stop after approximately 10 seconds.

Center before they can be viewed.

This will not eject the disc in the

Go to More Programs and select

changer optical drive. You must go to

Manage Discs or to My DVDs

Media Center to eject the last disc.

4 Click Yes on the NEW DISCS

See steps 1 through 2 of To eject

FOUND message to update your

discs using Media Center.

library with the new disc information.

 

 

 

Note: Loading Media Note: It may take up to 60 seconds for Media Center to scan each disc. It is recommended to insert each disc into the changer, and then let them all scan one after the other. For additional information, go to the Manage Discs topic in My Changer.

84