25
Security Lock
Convenient Functions
Enter the password on this screen.
3Enter the password again to confirm.
When “Security Lock Enabled!” is
displayed on the menu screen, the
setting for security lock is completed.
If “Invalid Password!” is displayed on
the menu screen, perform this procedure
again from step 1.
4Turn the main power off and
disconnect the AC power cord.
The security lock is set to on, then it
becomes effective. The screen used for
entering the password is displayed when
the power is turned on the next time.
Security certification
When the password screen is displayed,
enter the password that was set. If you fail to
enter the correct password after three tries,
the projector cannot be used. In this case,
press the ?/1 key to turn off the power.
To cancel the security lock
1Press the MENU key, then turn off the
“Security Lock” setting in the Function
menu.
2Enter the password.
Enter the password that was set.
If you call the customer service center because
you have forgotten the password, you will need
to be able to verify the projector’s serial
number and your identity. (This process may
differ in other countries/regions.) Once your
identity has been confirmed, we will provide
you with the password.
Enter new password key.
Security Lock
Power-on cannot be performed
without the password.
Use: Cancel: Other key
Re-enter new password key.
Security Lock
Be sure to remember this password.
Use: Cancel: Other key
Note