Sony VPL-PX35 specifications

Projector Lamp

LMP-P260

(for replacement)

Suspension Support

PSS-610

LMP-P260

Specifications Input Signal Preset Data

Optional Accessories

Dimensions

VPL-PX40 VPL-PX35

Projection system 3 LCD panels, 1 lens projection system

LCD panel

Projection lens

0.99-inch p-Si TFT Sony LCD panel

with Micro Lens Array

2,359,296 pixels (786,432 pixels x 3)

0.99-inch p-Si TFT Sony LCD panel

2,359,296 pixels (786,432 pixels x 3)

Approx. 1.3 times zoom lens, F1.7 to 2.3, f37.6 to 48.8 mm

Lamp 265 W UHP Lamp

Screen coverage 40 to 300 inches (viewable area, measured diagonally)

Light output 2600 ANSI lumens*1

3500 ANSI lumens*1

Color system NTSC, PAL, SECAM, NTSC4.43, PAL-M, PAL-N (automatically/manually selected)

Resolution Video: 750 TV lines, RGB: 1024 x 768 pixels

Acceptable computer signals

Acceptable video signals

RGB (fH: 19 to 92 kHz, fV: 48 to 92 Hz (up to UXGA) )

(480/60i, 575/50i, 480/60p, 540/60p, 575/50p, 720/60p, 720/50p, 1080/60i, 1080/50i),

15 kHz RGB/Component 50/60 Hz,Progressive component 50/60 Hz, DTV

Composite video, Y/C video

Speaker Stereo speakers system 40 x 70 mm (1 5/8 x 2 7/8 inches) Max. 2W x 2

Power requirements 100 to 240 V, 50/60 Hz

Power consumption Max. 365 W, Standby 6 W

Operating temperature 0 to 35˚C (32 to 95˚F)

Operating humidity 35 to 85%

Dimensions 420 (W) x 115 (H) x 316 (D) mm (16 5/8 x 4 5/8 x 12 1/2 inches)

Mass Approx. 7.5 kg (16 lb 10 oz)

Heat dissipation 1246 BTU

Composite

VIDEO IN

INPUT A

INPUT B

INPUT C

INPUT D

USB

OUTPUT

REMOTE

CONTROL S IN/

PLUG IN POWER

Phono type, 1.0 Vp-p ±2 dB sync negative, 75 Ω

Y/C IN Mini DIN 4-pin

Y1.0 Vp-p ±2 dB sync negative, 75Ω

CBurst 0.286 Vp-p ±2 dB (NTSC), 75Ω or 0.3 Vp-p ±2 dB (PAL), 75Ω

Analog RGB HD D-sub 15-pin (female)

R0.7 Vp-p ±2 dB positive, 75Ω

G0.7 Vp-p ±2 dB positive, 75Ω

G with Sync 1.0 Vp-p ± 2dB sync negative, 75Ω

B0.7 Vp-p ± 2dB positive, 75Ω

SYNC/HD

Composite sync 1.0 to 5.0 Vp-p, high impedance positive/negative

Horizontal sync 1.0 to 5.0 Vp-p, high impedance positive/negative

Vertical sync 1.0 to 5.0 Vp-p, high impedance positive/negative

AUDIO IN Stereo mini jack, 500 mV rms, impedance more than 47 kΩ

Analog RGB HD D-sub 15-pin (female)

R0.7 Vp-p ±2 dB positive, 75Ω

G0.7 Vp-p ±2 dB positive, 75Ω

G with Sync 1.0 Vp-p ± 2dB sync negative, 75Ω

B0.7 Vp-p ±2 dB positive, 75Ω

SYNC/HD

Composite sync 1.0 to 5.0 Vp-p, high impedance positive/negative

Horizontal sync 1.0 to 5.0 Vp-p, high impedance positive/negative

Vertical sync 1.0 to 5.0 Vp-p, high impedance positive/negative

AUDIO IN Stereo mini jack, 500 mV rms, impedance more than 47 kΩ (Shared by INPUT B/C)

Digital RGB DVI-D (TMDS)

Analog RGB/Component

R/R-Y 0.7 Vp-p ±2 dB positive, 75Ω

G0.7 Vp-p ±2 dB positive, 75Ω

5 BNC (Female)

G with Sync/Y 1.0 Vp-p ±2 dB sync negative, 75 Ω

B/B-Y 0.7 Vp-p ±2 dB positive, 75Ω

SYNC/HD

Composite sync 1.0 to 5.0 Vp-p, high impedance positive/negative

Horizontal sync 1.0 to 5.0 Vp-p, high impedance positive/negative

Vertical sync 1.0 to 5.0 Vp-p, high impedance positive/negative

AUDIO IN Stereo mini jack, 500 mV rms, impedance more than 47 kΩ

Up (female) x 1 (Shared by INPUT A/B/C/D)

MONITOR OUT*2

HD D-sub 15-pin (female) RGB: Gain Unity, 75Ω SYNC/HD, VD: 4.0 Vp-p (open), 1.0 Vp-p (75 Ω)

RS-232C D-sub 9-pin (female)

AUDIO OUT (Variable out)

Stereo mini jack, max. 1 V rms, when the input siginal is 500 mV rms, impedance less than 5 kΩ

ETHERNET port RJ-45: 10 BASE-T/100 BASE-TX

Stereo mini jack

5.0 Vp-p, plug in power, DC 5V

UL, cUL, DHHS, FCC Class A, IC Class A, NEMKO, CE (LVD), CE (EMC), C-Tick, CCC, VCCI class B, JEITA

Laser type Class II

Wavelength

Output

Remote commander, Monitor Cable (2 m): HD D-sub 15-pin to HD D-sub 15-pin, USB Cable A type to B type (2 m),

AA size Battery (x 2), Lens Cap, Air Filter, Operating Manual, Installation Manual for dealers

645 nm

1 mW

Model

Optical

Signals

General

Inputs/Outputs

Safety regulations

Laser beam

Supplied

accessories

No.

10*

11*

12*

13*

14*

15*

16*

17*

18*

19*

20*

21*

22*

23*

24*

25*

26*

27*

30*

32*

34*

36*

Preset Signal

VIDEO/60 60Hz 15.734 59.940

15.62550.000

15.73459.940

SonG/Y

15.62550.000 or

33.75060.000

Composite

31.46970.086 P/N

37.86185.080 P/N

24.82356.416 N/N

31.46970.086 N/P

37.86185.080 N/P

31.46959.940 N/N

35.00066.667 N/N

37.86172.809 N/N

37.50075.000 N/N

43.26985.008 N/N

35.15656.250 P/P

37.87960.317 P/P

48.07772.188 P/P

46.87575.000 P/P

53.67485.061 P/P

49.72474.550 N/N

35.52486.958 P/P

48.36360.004 N/N

56.47669.955 N/N

60.02375.029 P/P

68.67784.997 P/P

63.99570.019 P/P

67.50075.000 P/P

77.48785.057 P/P

61.79565.960 N/N

71.71376.047

Cneg(N/P)

60.00060.000 P/P

75.00075.000 P/P

46.43386.872 P/P

53.31650.062

SonG(P/P)

63.97460.013 P/P

79.97675.025 P/P

91.14685.024 P/P

75.00060.000 P/P

31.47060.000 SonG

31.25050.000 SonG

28.13050.000

45.00060.000

37.50050.000

33.75060.000

63.98160.020 N/N

VIDEO/50 50Hz

480/60i

575/50i

HDTV 1035/60i, 1080/60i

640x350

640x400

640x480

800x600

832x624

1024x768

1152x864

1152x900

1280x960

1280x1024

1600x1200

VGA-1

(VGA350)

VESA 85(VGA350)

NEC PC98

VGA-2(TEXT)/VESA70

VESA 85(VGA400)

VESA 60

Mac 13

VESA 72

VESA 75(IBM M3)

VESA 85(IBM M4)

VESA 56

VESA 60

VESA 72

VESA 75(IBM M5)

VESA 85

Mac 16

VESA 43(8514)

VESA 60

VESA 70

VESA 75

VESA 85

VESA 70

VESA 75

VESA 85

SUN LO

SUN HI

VESA 60

VESA 75

VESA 43

SGI-5

VESA 60

SXGA VESA75

SXGA VESA85

UXGA VESA60

480/60p

(double frequency of NTSC)

575/50p

(double frequency of PAL)

1080/50i

720/60p

720/50p

540/60p

1400x1050 SXGA+

(kHz) fV

(Hz) H/V

When the signal other than ones in "Preset Signals" are input,

the picture may not display correctly. When the aspect ratio of

an input signal is other than 4:3, a part of the screen is

displayed in black. The UXGA signal can be projected only

when user set the frequency of a computer 60Hz. The digital

input complies with the signals marked with asterisks(*) on the

table. When the digital signal output from a computer is a

signal other than the signals marked with asterisks(*) among

the memory numbers 6 to 39, it is automatically output

according to the specifications of the projector. The memory

numbers 22 and 34 are the interlace signals.

Signal Cables

SMF-400

(HD D-sub 15-pin to 5 BNC, for

RGB signal)

Optional Lenses

VPLL-FM22

(Fixed short-focus lens)

VPLL-ZM102

(Long-focus zoom lens)

*1 ANSI lumens is a measuring method of the American National Standards Instisute IT7. 228. Since there is no uniform method of measuring

brightness, specifications will vary among manufactures. *2 DIGITAL RGB and Component signals are not output from the MONITOR OUT terminal.

Reproduction in whole or in part without permission is prohibited.

Features and specifications are subject to change without notice.

All non-metric weights and measures are approximate.

Sony is a registered trademark of Sony Corporation.

Mac is registered trademark of Apple Computer, Inc.

Printed in Japan on recycled paper.MK10045V1FRT03MAR

Distributed by

316(12 1/2)

115(4 5/8)

Halogenated flame retardants are not used in cabinets.

Lead-free solder is used for soldering.

Polystyrene foam for the packaging cushions

is not used in packaging.

Unit:mm (inches)

420(16 5/8)

145(5 3/4)

87(3 1/2)

©2003 Sony Corporation. All rights reserved.