10
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
1: Attaching the Table-Top
Stand (except
XBR-65HX929)
Refer to the supplied Table-Top Stand
instruction leaflet for proper attachment.
~
•Do not put stress on the LCD panel or the
frame around the screen.
•Be careful to not pinch your hands or the AC
power cord when you install the TV unit to the
Table-Top Stand.
For XBR-55/46HX929,
KDL-55/46HX820 and
KDL-55/46NX720
1Place the TV unit on the Table-Top
Stand.
~
•Align the TV from the top, slide it in until the
guide pins cannot be seen.
2Use the supplied screws to attach the
TV unit to the Table-Top Stand.
~
•If you use an electric screwdriver, set the
torque at approximately 1.5 N·m {15 kgf·cm}.
For KDL-60NX720
1Align with the two dowels of the
Table-Top Stand, and gently place
the TV, checking that the f mark is
facing the front.
2Attach the TV and Table-Top Stand
with the supplied screw and hexagon
wrench.
~
•Tighten to approximately 3 N·m {30 kgf·cm}.
Guide
pins
Neck
*
Head
* 3 N·m {30 kgf·cm}