14 Selecting the Menu Language
4 If ASIA EXCEPT JAPAN is selected:
Customers who will use this unit in the shaded areas shown
in the map below should select NTSC AREA.
Other customers should select PAL AREA.
3Press the M or m button to narrow the area further and then
press the , or ENTER button.
The SELECT SETTING screen disappears and the menu
item settings suitable for the selected area are applied.
Note
When you have selected the wrong area, set the following items
using the menu.
COLOR TEMP (on page 17)
COMP LEVEL (on page18)
NTSC SETUP (on page18)
See “The default setting values for each area” (page13) on the settin g
value.
Selecting the Menu LanguageYou can select one of seven languages (English, French, German,
Spanish, Italian, Japanese, Chinese) for displaying the menu and
other on-screen displays.
The current settings are displayed in place of the x marks on the
illustrations of the menu screen.
1Press the POWER switch to turn on the unit.
2Press the MENU button.
The menu appears.
The menu presently selected is shown as a yellow button.
3Press the M or m button to select the USER CONFIG 1/2
(User Configuration 1/2) menu, then press the , or
ENTER button.
The setting items (icons) in the selected menu are displayed
in yellow.
A S I A E X C E P T J A P A N
x N T S C A R E A
• P A L A R E A
NTSC area
PAL area
RESET
MENU VOLUME POWER
KEY
INHIBIT
ENTER
3~5 2 1
CONTROL
·CONTRAST x
·BRIGHT x
·CHROMA x
·PHASE x
·APERTURE xxx
·BACKLIGHT x
USER CONTROL