Press U/u repeatedly to select the setting you want to adjust.
Press ENTER to enter.

•RETRY?

Appears to ask you to re-measure or exit without re-measuring when the measurement fails.

•CANCEL

Appears when you cancel auto calibration during the measurement.

*TSP (Time Stretched Pulse)

A TSP signal is a highly precise measuring signal that utilizes impulse energy, measuring a wide band, from low to high, in a short period.

The amount of energy used to measure signals is important to ensure measurement accuracy in a normal indoor environment. Using TSP signals makes it possible to measure signals effectively.

xCAL TYPE (Parameter type)

•ENGINEER

Sets the frequency to one that matches that of the Sony listening room standard.

•FULL FLAT

Makes the measurement of frequency from each speaker flat.

xEQ CURVE EFFECT (Activates/deactivates the EQ curve measurement)

•OFF

Deactivates the EQ curve measurement.

•ON

Activates the EQ curve measurement. After the measurement is completed, this setting is set to ON automatically.

Notes

•DTS 96/24 signals are played back as 48 kHz signals when EQ CURVE EFFECT is set to “ON.” When you play back DTS 96/24 signals, set this item to “OFF” and set the DIRECT function to “ON” (page 10, 12).

•You cannot select this setting before saving the measurement results (factory setting).

Settings for the amplifier

By using the System Settings menus, you can make various adjustments to customize the amplifier.

1 Press MENU.2 Press U to display “<1-SystemSettings>,” then press ENTER to enter the menu.3 Press U/u repeatedly to display the parameter you want to adjust.4 Press ENTER to enter the parameter.

5

6

7 Repeat steps 3 to 6 when you want to make other settings.To return to the menu one level up

Press I.

To exit the menu

Press MENU.

Note

Some parameters and settings may appear dimmed on the display. This means that they are either unavailable or fixed and unchangeable.

16GB