Amplifier section
POWER OUTPUT
Rated Power Output*
8 ohms 1 kHz, THD 0.7%:
110 W + 110 W
4 ohms 1 kHz, THD 0.7%:
120 W + 120 W
Power requirements 230 V AC, 50/60 Hz
*Measured under the following conditions: Power requirements: 230 V AC, 50/60 Hz
| (in countries/area in Europe |
| other than UK) |
| 240 V AC, 50/60 Hz |
| (in UK and general area) |
Frequency response | |
|
|
PHONO | RIAA equalization curve |
| ± 0.5 dB |
|
|
TUNER, | 10 Hz – 40 kHz |
TAPE | ± 3 dB (8 ohms) |
|
|
Inputs (Analog) |
|
|
|
PHONO | Sensitivity: 2.5 mV |
| Impedance: 50 kohms |
| S/N: 86 dB (A, 20 kHz |
| LPF) |
|
|
TUNER, | Sensitivity: 150 mV |
TAPE | Impedance: 50 kohms |
| S/N: 96 dB (A, 20 kHz |
| LPF) |
|
|
Output (Analog) |
|
|
|
TAPE | Voltage: 150 mV |
| Impedance: 1 kohms |
|
|
Inputs (Digital) |
|
|
|
DIGITAL 1/2/3 | Impedance: 75 ohms |
| S/N: 96 dB (A, 20 kHz |
| LPF) |
|
|
DIGITAL 4 | S/N: 96 dB |
| (A, 20 kHz LPF) |
|
|
Output (Digital)
DIGITAL 4 | S/N: 96 dB |
| (A, 20 kHz LPF) |
|
|
TONE |
|
|
|
TREBLE | ±10 dB, 1 dB step |
|
|
BASS | ±10 dB, 1 dB step |
|
|
General
Power requirements 230 V AC, 50/60 Hz (in countries/area in Europe other than UK) 240 V AC, 50/60 Hz (in UK and general area)
Power consumption 100 W
Power consumption (during standby mode) 0.5 W
AC outlets | 1 switched, 100 W/0.4 A |
| MAX (in countries/area in |
| Europe other than UK) |
Dimensions | 430 × 173 × 428 mm |
| including projecting parts |
| and controls |
Mass (Approx.) | 14.0 kg |
Supplied accessories
Operating Instructions (this manual) Optimizer microphone
Design and specifications are subject to change without notice.
22GB