•Be sure to turn the power off before adjusting the IMPEDANCE SELECTOR.
•When you connect all speakers with a
nominal impedance of 8 ohms, set the IMPEDANCE SELECTOR to “8Ω .” When
connecting other types of speakers, set it to “4Ω .”
•When you connect speakers to both the SPEAKERS A and B terminals, connect the speakers with a nominal impedance of 8 ohms or higher.
–When you connect speakers with impedance of 16 ohms or higher in both
“A” and “B” configuration:
Set IMPEDANCE SELECTOR to “8Ω .”
–For other types of speakers in other
configurations:
Set IMPEDANCE SELECTOR to “4Ω .”
•If you are not sure of the impedances of the speakers, refer to the operating instructions supplied with your speakers. (This information is often on the back of the speaker.)
Started Getting
SPEAKERS B terminals*
IMPEDANCE SELECTOR
Speaker A Speaker A
(R)(L)
*If you have an additional speaker system, connect them to the SPEAKERS B terminals. You can select the speaker system you want to use with the SPEAKERS (OFF/A/B/A+B) on the front panel (page 11).
5GB