– 16 –
ENGLISH
H
V
OFF ON
ERROR POWER
FEED
4Place the ribbon cartridge in the
direction shown in Fig. 5-10 and
press it down to load it. If loading of
the ribbon cartridge is not satisfac-
tory, press down the cartridge while
rotating the ribbon feed knob in the
direction of the arrow.
5Turn the ribbon feed knob of the
ribbon cartridge in the direction of
the arrow to remove slack in the
ribbon.
6Close the Auto Cutter.
7Close the cover.
Note: When removing the ribbon
cartridge, raise the A section
and then remove it by hold-
ing the B section as shown in
Fig. 5-11.
Fig. 5-10 Loading the ribbon cartridge
Ribbon separater
Print head
Ink ribbon
Ribbon
feed knob
Notched
part
Ribbon
cartridge
Auto cutter
H
V
OFF ON
ERROR POWER
FEED
A
Fig. 5-11 Removing the ribbon cartridge
B