Cutting Techniques
Felling
Felling is cutting down a tree.
Before felling a tree, consider carefully all conditions which may affect the direction of fall.
Warning!
There are a number of factors that may affect and change the intended direction of fall, e.g. wind direction and speed, lean of tree, surrounding trees and obstacles, sloping ground,
Warning!
Always observe the general condition of the tree. Inexperienced users should never attempt to cut trees that are decayed or rotted inside or that are leaning or otherwise under tension. There is an increased risk that such trees could snap or split while being cut and cause serious or fatal injury to the operator or bystanders. Also look for broken or dead branches which could vibrate loose and fall on the operator. When felling on a slope, the operator should stand on the uphill side if possible.
Felling Instructions
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| LÄ |
|
|
|
| 1 |
|
|
| 1/2 |
|
| 1 |
|
|
| 001BA088 |
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
| 21/2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When felling, maintain a distance of at least 2 1/2 tree lengths from the nearest person.
When felling in the vicinity of roads, railways and power lines, etc., take extra precautions. Inform the police, utility company or railway authority before beginning to cut.
Warning!
The noise of your engine may drown any warning call.
English
Escape Path
B |
|
45° |
|
A |
|
45° |
|
B | KN |
| 001BA040 |
|
|
First clear the tree base and work area from interfering limbs and brush and clean its lower portion with an ax.
Then, establish two paths of escape (B) and remove all obstacles. These paths should be generally opposite to the planned direction of the fall of the tree
(A)and about at a 45° angle. Place all tools and equipment a safe distance away from the tree, but not on the
escape paths.
MS 170, MS 170 C, MS 180, MS 180 C | 17 |