English
Ordering Spare Parts | Maintenance and Repairs |
1 | 2 | 3 | 4 |
| |
| cm |
|
|
| |
| INCH |
|
|
| |
1 | 2 | 3 | 4 | KN | |
001BA209 | |||||
|
|
|
|
NDetermine the appropriate set of tabs to be used based on the length the bar
NPush the scabbard extension over the scabbard until the
Please enter your saw model, serial number as well as the part numbers of the guide bar and saw chain in the spaces provided. This will make reordering simpler.
The guide bar and saw chain are subject to normal wear and tear. When purchasing these parts, always quote the saw model, the part numbers and names of the parts.
Model
Serial number
Guide bar part number
Chain part number
See "Specifications" in this manual for the recommended reduced kickback cutting attachments.
Users of this unit should carry out only the maintenance operations described in this manual. Other repair work may be performed only by authorized STIHL service shops.
Warranty claims following repairs can be accepted only if the repair has been performed by an authorized STIHL servicing dealer using original STIHL replacement parts.
Original STIHL parts can be identified by the STIHL part number, the { logo and, in some cases, by the STIHL parts symbol K. The symbol may appear alone on small parts.
52 | MS 170, MS 170 C, MS 180, MS 180 C |