English

Cutting Attachment

STIHL is the only manufacturer in the industry to produce its own chain saws, guide bars, saw chains and chain sprockets.

A cutting attachment consists of the saw chain, guide bar and chain sprocket.

The cutting attachment that comes standard is designed to exactly match the chain saw.

1 2

 

3

KN

a

001BA191

t = a : 2

 

–The pitch (t) of the saw chain (1), chain sprocket and the nose sprocket of the Rollomatic guide bar must match.

–The drive link gauge (2) of the saw chain (1) must match the groove width of the guide bar (3).

If non-matching components are used, the cutting attachment may be damaged beyond repair after a short period of operation.

Mounting the Bar and Chain

Releasing the chain brake

4

151BA002 KN

NPull the hand guard (4) toward the handle until there is an audible click

– the chain is disengaged.

Removing the chain sprocket cover

6

5

KN

142BA058

 

NUnscrew the nut (5) and remove the cover (6).

Mounting the guide bar

7

8

KN

142BA059

 

NTurn the screw (7) counterclockwise until the tensioner slide (8) butts against the left end of the housing slot.

9

10

KN

142BA060

 

NFit the guide bar over the stud (9) and engage the peg of the tensioner slide in the hole (10).

Fitting the chain

Wear work gloves to protect your hands from the sharp cutters.

24

MS 192 C