English

Version with Easy2Start

213BA018 KN

NRemove remaining rope from the rotor and starter grip

NThread the new starter rope through the starter grip and secure it by making a knot

Installing the rope rotor

Version with ElastoStart

1

2

0011BA025 KN

NThread the rope from above through the rope guide bush (1) and rope rotor (2) and secure with a simple overhand knot

NCoat the bearing bore in the rope rotor with non-resinous oil

NSlip the rope rotor onto the starter post (3) – turn it back and forth a little until the anchor loop of the rewind spring engages

4 6 5

0011BA026 KN

NRefit the pawl (4) in the rotor and slip the washer (5) over the starter post

NPress the spring clip (6) on to the starter post and over the pegs of the pawl with a screwdriver or suitable pliers – the spring clip must point in the clockwise direction – as shown in the picture

42

MS 201, MS 201 C