English
Specifications
EPA / CEPA
The Emission Compliance Period referred to on the Emissions Compliance Label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
CARB
The Emission Compliance Period used on the
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Engine
Single cylinder
Displacement: | 2.15 cu. in. |
| (35.2 cm3) |
Bore: | 1.60 in (40 mm) |
Stroke: | 1.10 in (28 mm) |
Engine power to | 2.4 hp (1.8 kW) |
ISO 7293: | at 9,500 rpm |
Idle speed: | 3,000 rpm |
Maximum permissi- |
|
ble speed with bar |
|
and chain: | 14,000 rpm |
Ignition system |
|
Electronic magneto ignition | |
Spark plug |
|
(suppressed): | NGK CMR 6 H |
Electrode gap: | 0.02 in (0.5 mm) |
Fuel system
All position diaphragm carburetor with integral fuel pump
Fuel tank capacity: 10.5 fl.oz (0.31 l)
Chain lubrication
Fully automatic,
Oil tank capacity: | 7.4 fl.oz (0.22 l) |
Weight |
|
dry, without bar and chain | |
MS 201: | 8.6 lbs. (3.9 kg) |
MS 201 C: | 8.8 lbs. (4.0 kg) |
Cutting attachment
Recommended cutting attachments in compliance with Sec. 5.11 of ANSI standard B
Observe the information about ANSI standard B
Rollomatic E guide bars
STIHL reduced kickback guide bars (with green label)
Bar lengths: | 12, 14, 16 in. |
| (30, 35, 40 cm) |
Pitch: | 3/8" P (9.32 mm) |
Groove width: | 0.50 in. (1.3 mm) |
Sprocket nose: |
Saw chains 3/8" P
STIHL reduced kickback saw chain (with green label)
Picco Micro Comfort 3 (63 PMC3)
Pitch: | 3/8" P (9.32 mm) |
Drive link gauge: | 0.050 in. (1.3 mm) |
Picco Super 3 (63 PS3)
Pitch: | 3/8"P (9.32 mm) |
Drive link gauge: | 0.050 in. (1.3 mm) |
Picco Duro 3 (63 PD3)
Pitch: | 3/8"P (9.32 mm) |
Drive link gauge: | 0.050 in. (1.3 mm) |
Chain sprocket
54 | MS 201, MS 201 C |