English / USA

Opening the cap

Closing the cap

001BA160 KN

:Raise the grip until it is upright.

001BA161 KN

:Turn the cap counterclockwise (approx. a quarter turn).

:Remove the filler cap.

001BA162 KN

:Fit the cap - grip upright -marks must line up.

:Turn the cap clockwise as far as stop (approx. a quarter turn).

001BA163 KN

:Fold the grip flush with the top of the cap.

If the grip does not lie completely flush with the cap and the detent on the grip does not engage the recess in the filler neck, the cap is not properly seated and tightened and you must repeat the above steps.

165BA003 KN

Change the fuel pickup body once every year

:Drain the fuel tank.

:Use a hook to pull the fuel pickup body out of the tank and take it off the hose.

:Push the new pickup body into the hose.

:Place the pickup body in the tank.

36

MS 280 C