Specifications
EPA / CEPA
The Emission Compliance Period referred to on the Emissions Compliance Label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
Engine
STIHL single cylinder
Displacement: | 3.6 cu. in. (59 cm3) |
Bore: | 1.85 in. (47 mm) |
Stroke: | 1.34 in. (34 mm) |
Engine power to | 4.6 hp (3.4 kW) at |
ISO 7293: | 9,500 rpm |
Idle speed: | 2,800 rpm |
Max. permissible |
|
engine speed with |
|
bar and chain: | 14,000 rpm |
Ignition System |
|
Electronic magneto ignition
Spark plug (resistor Bosch WSR 6 F,
type): | NGK BPMR 7 A |
Electrode gap: | 0.02 in. (0.5 mm) |
Fuel System
All position diaphragm carburetor with integral fuel pump
Fuel tank capacity: 20.3 fl.oz (0.60 l)
Chain Lubrication
Fully automatic,
Oil tank capacity: 11.0 fl.oz. (0.325 l)
Weight
dry, without bar and chain
MS 362 C: | 13.0 lbs (5.9 kg) |
Cutting Attachment
Recommended cutting attachments complying with Section 5.11 of ANSI B
Observe notes on ANSI B
English
3/8" chains
Reduced kickback STIHL saw chains (with green label)
Rapid Super C3 (33 RSC3)
Rapid Super C3 (36 RSC3)
Rapid Micro C3 (33 RMC3)
Rapid Micro C3 (36 RMC3)
Pitch: | 3/8" (9.32 mm) |
Drive link gauge: | 0.050 in. |
| (1.3 mm)/0.063 in. |
| (1.6 mm) |
Rollomatic E guide bars with sprocket nose
Reduced kickback STIHL guide bar (with green label)
Bar lengths | 16, 18, 20, 25 in (40, 45, |
(3/8"): | 50, 63 cm) |
Groove width: | 0.050 in. |
| (1.3 mm)/0.063 in. |
| (1.6 mm) |
Other
STIHL saw chain (with yellow label) Rapid Micro Comfort (33 RMC) Rapid Micro Comfort (36 RMC) Rapid Super Comfort (33 RSC) Rapid Super Comfort (36 RSC)
Pitch:3/8" (9.32 mm)
Drive link gauge: 0.050 in. (1.3 mm)/0.063 in. (1.6 mm)
MS 362 C | 53 |