English / USA
At very low outside temperatures:
:Allow engine to warm up at part throttle.
:Change over to winter operation if necessary - see “Winter Operation”.
If the engine doesn’t start:
If you did not move the Master Control lever to "Warm Start" nquickly enough after the engine began to fire, the combustion chamber has flooded.
179BA012 KN
To shut down the engine:
:Move Master Control lever to 0.
If fuel tank has been run until empty and then refueled:
:Press in button to open the decompression valve.
:Start as described for warm engine (warm start n).
145BA027 K
:Open the twist lock and remove the carburetor box cover.
:Pull the hand guard back toward the front handle:=
The chain brake is now disengaged
– your saw is ready for operation.
Always disengage chain brake before accelerating engine. High revs with the chain brake engaged (chain locked) will quickly damage the powerhead and chain drive (clutch, chain brake).
:Observe safety precautions.
:Always check operation of chain lubrication before starting work.
If fuel tank has been run completely dry (engine stops) and then refueled:
:Press in button to open the decompression valve.
:Start as described for cold engine
(cold start l).
.
1
2
:Take out the baffle plate (1) upwards.
:Pull off the spark plug boot (2).
145BA039 KN
42 | Rescue Saw |