|
|
|
|
|
|
|
|
| English | |
PM1, RM2 |
|
|
|
| The other parts of the triple- | N After sharpening, clean the chain | ||||
Rear hump of the tie strap (with service | humped tie strap and humped | thoroughly, remove filings or | ||||||||
drive link must not be filed since | grinding dust – lubricate the chain | |||||||||
marking) is lowered along with the depth | ||||||||||
this may increase the kickback | thoroughly. |
| ||||||||
gauge. |
|
|
|
|
| |||||
|
|
|
| tendency of the saw. |
| N Before a long | ||||
RSC3, RMC3, PMC3, PMMC3 |
|
| ||||||||
|
|
|
| |||||||
|
|
|
| clean the chain and store it in a well- | ||||||
The upper part of the humped drive link |
|
|
| |||||||
|
|
| oiled condition. |
| ||||||
(with service marking) is lowered along |
|
|
|
|
| |||||
with the depth gauge. |
|
|
|
|
|
|
| |||
Sharpening Tools (special accessories) |
|
|
|
| Sharpening kit 1) | |||||
Pitch |
| Round file ^ | Round file |
| File holder | Filing gauge | Flat file | |||
inch | (mm) | mm | (inch) | Part No. |
| Part No. | Part No. | Part No. | Part No. | |
1/4 | (6,35) | 4,0 | (5/32) | 5605 772 4006 | 5605 750 4327 | 1110 893 4000 | 0814 252 3356 | 5605 007 1027 | ||
3/8 P | (9,32) | 4,0 | (5/32) | 5605 772 4006 | 5605 750 4327 | 1110 893 4000 | 0814 252 3356 | 5605 007 1027 | ||
0.325 | (8,25) | 4,8 | (3/16) | 5605 772 4806 | 5605 750 4328 | 1110 893 4000 | 0814 252 3356 | 5605 007 1028 | ||
3/8 | (9,32) | 5,2 | (13/64) | 5605 772 5206 | 5605 750 4329 | 1110 893 4000 | 0814 252 3356 | 5605 007 1029 | ||
0.404 | (10,26) | 5,5 | (7/32) | 5605 772 5506 | 5605 750 4330 | 1106 893 4000 | 0814 252 3356 | 5605 007 1030 | ||
1)consisting of file holder with round file, flat file and filing gauge
MS 880 | 47 |