Sun Microsystems 6.0005E+11 manual Proceed to step

8

Figure 8-5CD-ROM/Tape Drive Removal and Replacement

Note – If there are two devices in the enclosure, the data and power cables must be removed from both devices before pulling out the enclosure.

4.Once the cabling is removed, remove the device enclosure from the SCSI tray.

5.Remove the drive.

a.To remove a CD-ROM drive, remove two screws from each side where the device is secured to the device enclosure and then proceed to Step 7.

b.To remove a tape drive, remove 2 screws from each side where the tape is fastened to the device enclosure, and then remove 4 screws securing the device to the enclosure side plate.

Proceed to step 7.

8-6 Ultra Enterprise 6000/5000/4000 Systems Manual—November 1996