Sunrise Global and CM500 IP, CM250 IP, CM100 IP manual View Scan Saved File

64

PC-IP Software

User’s Manual

VIEW SCAN SAVED FILE

When the Scan icon is in color, it means that the current file is a Scan saved file and can be viewed and analyzed by clicking on the icon. When the icon is selected, a window (Figure 5-4) displays the Scan saved data. The Technician name, type of file and File Name and Location will be displayed in the upper right area of the screen. The location indicates the current set of Limits criteria used for the Pass/Fail analysis: Set-Top, Ground Block, Tap. The display automatically configures itself to best display the type of signal that is being measured, according to the Channel Table data and measurement levels.

Scan is an automated test mode with a quick and comprehensive set of tests on all of the channels in the currently active channel table. The Install Profiler steps through the channel table and measures the video and audio or digital carrier level of each active channel, displays the measurements graphically on the screen and builds a data table with the measurement results in tabular form. The measurement results are also compared to the Limits criteria stored in memory in the Limits Setup screen. See the Limits Setup section. Measurements, which fall within the Limits criteria, will be displayed in their normal colors; measurements outside of the Limits criteria will be displayed in red. Set the appropriate Location prior to initiating Scan so that the appropriate Limits criteria is used to qualify the test results.