Swann SW242-4SN, SW243-4MB, SW243-9MB, SW242-9SN user manual H/W Sensor Setup, Motion Detector Setup

6.8 Sensor Setup

Sensor Record Time indicates how long the recording time is when the motion or sensor is triggered.

Alarm On Time indicates whether the buzzer will sound when motion is detected.

CONT: Continuous alarm until any key is pressed.

OFF: No alarm

6.9 H/W Sensor Setup

Note: Sensors and extension alarms are not included with the DVR system and may be purchased separately.

HARDWARE SENSOR SETUP:

There are 3 different modes for sensor setting: NOT INSTALLED, NORMAL -CLOSE and NORMAL-OPEN. Consult the alarm purchased for more details on which setting is required.

6.10 Motion Detector Setup

This section allows you to set up motion detection options for each camera.

MOTION DETECTOR SETUP:

ON/OFF: Enable or disable motion detection

recording

LEVEL: Sensitivity of motion detection. There

are 3 levels of sensitivity: Level 1-low, 3- highest.

AREA: Select detectable area on the screen.

11