Swann SW243-8N8

8/16 Channel Digital Video Recorder

As ADSL and CABLE MODEM network users usually use dynamic IP address, so once the

MODEM restarts, the IP addresses will change. For this situation, users should apply for DNS

services.

To use the Swann DVRs with remote viewing capabilities you may have to “open“ ports on your

Windows® Firewall, your Software Firewall or on the Broadband Router/Modem that you use to

connect to the Internet. Please consult the documentation or help files on the relevant software or

system for instructions on how to do this. To successfully access your cameras from the Internet

you will need to have allowed access to and from the following ports from an outside connection.

This process is also called “Port Forwarding” or creating a “Virtual Server” connection.

For more information on Port Forwarding, please visit www.portforward.com

Once you have correctly forwarded the ports, please check to see what your external IP address is

(this cannot start with 192.168.x.x). You can check this by going to http://www.whatismyip.com

(note: you must do this on the server machine to find the correct external IP of the router.)

You may also have to place the IP address of the Swann DVR in the “DMZ” of your Firewall to

enable the remote viewing interface. Information on how to do this should be detailed in the

documentation covering operation of your Firewall.

As ADSL and CABLE MODEM network users usually use a dynamic IP address, once the

MODEM restarts, the IP addresses can change. Users can opt for a static IP address which does

not change by contacting their ISP. Otherwise users can apply for a DNS service through