13

OPERATION AND FUNCTIONS

PHONO
POWER
CDP-50 CD-PLAYER
1
3
3
Turn on the unit by pressing the mains switch.
Press the standby button on the remote control to switch to standby
mode. The display will turn off and all functions will be reduced to a
minimum to make sure that the unit uses minimal power. When in standby
mode the unit only reacts to the standby button of the remote control.
If you wish to turn off the unit to avoid any power consumption, you must
press the mains switch.
Protect the environment and turn off the unit after use.
2
2
1

On, Off and standby

Load a disc

-8
8
no di sc
-8
8
15-58:34
If you want to play a disc, you must load it.
You do that by pressing the eject button on
the remote control or on the front panel of
the CD player.
When the disc has been read, the display
will show the number of tracks on the disc
and the total playback time.
If there is not disc in the tray, the message
"NO DISC" will be displayed. If the unit has
trouble reading a disc, you must check if the
disc is clean and free from dirt. If the disc
can still not be played, you must contact your
dealer.

Play

-8
8
1-00:01
Press the PLAY/PAUSE button on the
remote control or on the front panel once to
start playback.
The display will show a small play symbol,
which track is played, how long the current
track has been playing, and the music
calendar will show how many tracks are left.