4 5
2.0: INTRODUCTION
The Tannoy VNET12HP & VNET15 loudspeakers utilise high performance Dual Concentric™ drive units – the 12” (300mm)
PowerDual™ and the 15” (380mm) PowerDual™. The substantially increased efficiency and power handling of these all-new
driver designs ensures that the VNET12HP and VNET15 are capable of delivering high SPL’s in even the most demanding
applications. Like all Tannoy Dual Concentric loudspeakers the Tannoy VNET12HP and VNET15 exhibit true constant directivity,
providing an even frequency response over the entire area of coverage. The output capability makes the Tannoy V12HP and
VNET15 loudspeakers suitable for much larger audience sizes or venues requiring very high SPL’s, such as nightclubs.
The VNET300 offers the ultimate in sound quality for critical applications such as theatre, acoustic music venues and houses
of worship. For all applications where performance is the focus and the system should be so accurate that it reinforces, but
remains unobtrusive and acoustically transparent to the audience, the VNET300 is the natural choice. The 12” SuperDual™
ensures the most even frequency response over a wide coverage area in the medium size venues for which the Tannoy V300
is designed.
The asymmetric cabinet profile of the VNet Products allows flexible and discreet installation. As a foreground system, installation
is made simple with a range of Secur-ET mounting hardware, designed specifically for the V series – or the system can be
flown using the integral M10 inserts. For portable stage use the birch ply cabinet has a recessed carrying handle on the rear
of the cabinet and a blanking plate, which can be removed to install an optional pole mount. As a versatile low profile stage
monitor, the conical coverage pattern gives the performer greater freedom of movement than allowed by conventional horn
loaded designs.
The loudspeakers are factory calibrated for optimum individual performance; this way the user does not have to worry about
whether they have input the correct speaker management settings, or have to painstakingly optimise dynamics.They can
concentrate on room measurement and optimisation alone. The product is shipped with our VNET™ software package to
facilitate easy on-site commissioning of the system. This intuitive Windows interface controls all of the critical install functions,
as well as providing the interface for the ongoing monitoring of critical system status and performance data, all in real-time.
Implementation of the network could not be simpler; VNET™ will support ‘Free Network Topology’, using twisted pair cable &
RJ45 connectors. Each loudspeaker will contain a unique address so no user input will be required to configure the network
nodes. Each loudspeaker in the system can be individually optimized and acoustically profiled, taking into account its exact
position within the venue relative to the room boundary, and its own performance relative to the acoustic properties of the room
itself.
The Tannoy VNET15BP is a compact, versatile subwoofer system, primarily designed to extend the low frequency response
of the V series loudspeakers and increase system headroom. The VNET15BP will extend the frequency response of these
systems to below 40Hz and is capable of providing output levels normally be associated with considerably larger enclosures.
The VNET15BP comprises one high efficiency 380mm(15”) drive unit. The cabinet is constructed from multiple-ply hardwood,
which will survive the punishment that speaker systems are subjected to on the road and in club installations. The compact
dimensions of the VNET15BP enable it to be used in permanent or portable applications without being obtrusive.
The Tannoy VNET15HL is a horn-loaded subwoofer with very high output capability designed to provide maximum low frequency
impact.The tight and “punchy” sound of the VNET15HL adds depth and dramatic impact for a wide variety of sound reinforcement
applications. This powerful loudspeaker is capable of delivering remarkable sound pressure levels with extremely low levels
of distortion and power compression, while maintaining a uniform frequency response throughout its dynamic range.
The VNET15HL comprises one high efficiency 380mm (15”) drive unit. The cabinet is constructed from multiple-ply hardwood,
which will survive the punishment that speaker systems are subjected to on the road and in club installations. The compact
dimensions of the VNET15HL enable it to be used in permanent or portable applications without being obtrusive.
The Tannoy VNET18DR is a direct radiating subwoofer designed to compliment Tannoy VNET loudspeakers where high
definition sound reinforcement at low/ultra low frequencies with increased headroom is required. The VNET18DR extends
the frequency response of systems to below 30Hz, making it ideal for club, theatre and concert sound applications. This powerful
loudspeaker is capable of delivering high sound pressure levels with extremely low distortion and power compression while
maintaining a uniform frequency response throughout its dynamic range. The VNET18DR comprises one high efficiency
457mm(18”) drive unit. The cabinet is constructed from multiple-ply hardwood, which will survive the punishment that speaker
systems are subjected to on the road and in club installations.
VNET subwoofers feature recessed carrying handles and blank plate for a top-mounted stand socket, which serves as a base
for locating the main full range or mid/high speakers in the air. By using 35mm tubing the need for a tripod stand can be
eliminated.
VNET loudspeakers are factory calibrated for optimum individual performance; this way the user does not have to worry about
whether they have input the correct speaker management settings, or to painstakingly optimise dynamics.
They can concentrate on room measurement and optimisation alone. The product is shipped with our VNET™ software package
to facilitate easy on-site commissioning of the system. This intuitive Windows interface controls all of the critical install functions,
as well as providing the interface for the ongoing monitoring of critical system status and performance data, all in real-time.
Implementation of the network could not be simpler; VNET™ will support ‘Free Network Topology’, using twisted pair cable &
RJ45 connectors. Each loudspeaker will contain a unique address so no user input will be required to configure the network
nodes. Each loudspeaker in the system can be individually optimized and acoustically profiled, taking into account its exact
position within the venue relative to the room boundary, and its own performance relative to the acoustic properties of the room
itself.
INSTALLATION INSTRUCTIONS
1THIS PRODUCT MUST BE EARTHED. Use only a flexible cable or cord provided with a green or green and yellow core
which must be connected to the protective earthing terminal of the detachable Neutrik 'Powercon' type NEC3FCA
connector (Tannoy part number 3461 0919 as supplied with the equipment. The other end of the green or green and
yellow conductor must be connected to the earthing pin of a suitable mains plug or the earthing terminal of the installation.
The cord must be of maximum length 7.5 meters, rated SJ, SJT, or SJE, 10A minimum and be marked VW-1.
2 The electrical power connection to this product is only to be made via a detachable Neutrik 'Powercon' type NEC3FCA
connector (Tannoy part number 3461 0919) as supplied with the equipment. Wiring to this connector must only be made
by suitably qualified personnel and must comply with all local requirements.
3 Do not install this equipment in an enclosed space. Do not limit free ventilation and movement of air around the back
panel. Ensure that there is at least 100mm (4") of space around all sides of the product for ventilation.
4 Only use attachments and accessories approved by or specified by Tannoy.
FOR CUSTOMERS IN EUROPE
This product complies with both the LVD (electrical safety) 73/23/EEC and EMC (electromagnetic compatibility) 89/336/EEC
directives issues by the commission of the European community.
Compliance with these directives implies conformity with the following European standards:
EN60065 Product safety
EN55103-1 EMC emissions
EN55103-2 EMC immunity
This product is intended for the following electromagnetic environments: E2; E3 & E4. Environment E1 (domestic) is specifically
excluded.
FOR CUSTOMERS IN THE USA & CANADA
This product has been tested for electrical safety and complies with:
UL60065 7th edition
CA /CSA C22.2 No.60065-03
EMC
This equipment has been designed to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
Industry Canada Class A emission compliance statement: This Class B digital apparatus complies with Canadian ICES-003.
Avis de conformite' a' la re'glementation d'Industrie Canada. Cet appareil nume'rique de classe A est conforme a' la norme
ICES-003.
TM
2.0: INTRODUCTION
Tannoy has integrated the Dual Concentric™ point source, constant directivity drive unit with leading edge digital signal
processing, network control and class D amplifier technologies to create VNET™. High definition sound reinforcement (HDSR™)
loudspeakers designed to form the complete installation solution. Close integration and proximity of the main system elements
has many advantages, and permits the amplifiers, processing, monitoring and drivers to perform as a unified whole. The
resulting package is a very high performance loudspeaker with intuitive user setup, integrated processing, tuning control,
performance diagnostics and protection. Class D power amplification with a switched mode power supply is very efficient,
flexible and reliable. Little is required in the way of heat sinking and no fans are required. The small control panel on the rear
of the cabinet is all the surface area that is needed for cooling, allowing the unit to operate at a low temperature, even when
driven at very high power levels. The digital electronics (DSP) also use switched mode regulators to further improve efficiency
and enhance design synchronicity of the entire package.
The Tannoy VNet Range of professional loudspeakers have been designed for a wide variety of sound reinforcement applications
requiring extended frequency response from a powerful yet compact system, capable of delivering high sound pressure levels
with extremely low distortion, resulting in outstanding clarity, definition and detail.
The Tannoy VNET12 comprises one 12 inch Dual Concentric driver, in which the low frequency (LF) and high frequency (HF)
sources are coincidentally aligned to a point source, resulting in a smooth uniform frequency response over a wide area of
coverage either as a portable stand alone system or in a multi-cabinet array. The sophisticated CAD designed waveguide
combines conical dispersion and excellent acoustic impedance characteristics. As the system is a point source, clusters and
arrays have minimal lobing. These features are inherent and achieved without the use of any electronic signal processing.