Targus Wireless RF Mouse Using the RF Mouse, Windows® 2000/XP Operating Systems, Installing the Batteries

Targus Wireless RF Mouse 5

Windows® 2000/XP Operating Systems

1Turn on your computer.

The Found New Hardware Wizard appears.

If it does not, the operating system has installed the default driver automatically. No other steps are necessary.

2Click Next.

The wizard searches for the appropriate device driver.

3Click Next.

4Click Finish to complete the driver installation

You are now ready to install the batteries in the mouse, set the radio frequency channel, and establish a communications link between the mouse and its receiver. See “Establishing a Communications Link (All RF Mouse Models)” on page 6.

Using the RF Mouse

Installing the Batteries

1Remove the battery cover from the bottom of the mouse by pressing the battery cover tab and siding it off.

NOTE: If you have a model PAUM005 RF mouse, the battery cover is also the top cover of the mouse.