5 – Playing Back CDs
ªª Using the P.MODE key on the remote control
3Use the –/+ keys to select the desired playback mode (see above).
4Press the ENTER key to return to the standard dis- play. The selected playback mode is retained even if the power is turned OFF.
P.MODE key
1Each time you press the P.MODE key on the remote control, the playback mode changes.
Programmed playback (PROG), however, cannot be selected during playback or when paused. To select programmed playback, press the P.MODE key when playback is stopped or no CD is loaded. The current mode is shown with an indicator on the display as follows.
| Display | Playback mode |
|
|
|
No indicator | Continuous playback | |
|
|
|
SINGLE | Single playback | |
|
|
|
RANDOM | Random playback | |
|
|
|
PROGRAM | Programmed playback | |
|
|
|
|
|
|
|
|
|
•• Immediately after pressing the P.MODE key, the selected mode is shown in the main display area as follows.
•• In this Owner’s Manual, explanations assume that the CD playback mode is set to CONTINUE (continuous playback mode) unless otherwise specified.
ªª Setting the playback mode with the menu
(See “Using the menu” on page 17 for further explanation about how to use the menu.)
1When in standard display mode, press the MENU key to enter menu mode.
2Use the
Programmed playback
If you set the playback mode to “PROGRAM” as described in “Selecting the playback mode” above, this unit can conduct programmed playback. In this mode, if you press the CD PLAY key on the main unit or the remote control, playback proceeds from the first track in the set program (program step “01”). Press the Ô/Â and ¯/ keys on the main unit or the SKIP Â/¯ keys on the remote control to skip to the previous/next program step.
You must set a program in advance to use programmed playback.
Setting the program
Use the remote control to set the program following the procedures below.
You can set the program at any time regardless of the current playback mode.
1When playback is stopped, press the PROGRAM EDIT key.
PROGRAM
EDIT key
This starts program input mode and the following types of information appear on the display. The top example is of an audio CD and the lower one is of a data CD.
TASCAM