TASCAM IF-AE8HR
TASCAM IF-AE8HR 7
AWORD SYNC – THRU (AUTO TERM)
This BNC connector echoes the word clock which is
input at the WORD SYNC – IN connector 9.
If no connection is made to this connector, it is auto-
matically terminated.
BWORD SYNC – OUT (STD Fs)
This BNC connector outputs a standard-frequency
word clock: either 44.1 kHz when 44.1k or 88.2k is
selected, or 48 kHz when 48k or 96k is selected.
CWORD SYNC – OUT (HI Fs)
This BNC connector outputs a high-frequency word
clock: either 88.2 kHz when 44.1k or 88.2k is
selected, or 96 kHz when 48k or 96k is selected.
NOTE
These clocks output from B and C may or may not
be the same as the clock received at WORD SYNC –
IN 9 and retransmitted through WORD SYNC –
THRU (AUTO TERM) A. However, they are always
the word clock selected using the CLOCK switch 3.
D~ IN (power in)
Use the supplied power cable to connect the IF-
AE8HR to the power supply. Always ensure that
your power supply matches the requirements marked
on the rear panel of the unit. If you are in any doubt,
consult a qualified electrician.
4Block Diagram5 SpecificationsDIGITAL I/O (AES/EBU) INPUTSconnector type XLR3-31-type, balanced, 110Ωinput format Auto-detect PRO AES3-1992 Amendement 3-1999 (AES) and CONSUMER IEC-60958 TYPE II formatsDIGITAL I/O (AES/EBU) OUTPUTSconnector type XLR3-32-type, balanced , 110Ωoutput format Switchable between PRO AES3-1992 Amendement 3-1999 (AES) and CONSUMER (IEC-60958 TYPE II) formatsDIGITAL I/O (TDIF-1)connector D-sub 25-pin female unbalancedformat Follows the TDIF-1 version 2 specificationWord clock source AES/EBU, TDIF-1, or WORD SYNC INValid input and output Fs rates 96kHz, 88.2 kHz, 48 kHz, 44.1 kHz (all ±6%)Word length Up to 24 bitsWORD SYNC INConnector BNCCPU
TDIF DIO
AES/EBU DIO
ROM
INPUTS
DIGITAL I/O ( AES/EBU )
LINE
DRIVER
LINE
RECEIVER
LOCK
CLOCK SOURCE
WORD IN
TDIF-1
AES(1-2,3-4,5-6,7-8)
SAMPLING FREQUENCY
44.1k
48k
88.2k
96k
DUAL
HI SPEED
CHANNEL STATUS
PRO
CONSUMER
Keys and indicators
WORD
IN THRU OUT
PLL
x 512
512Fs
512Fs
(RECEIVER)
OUT
4
4
Fs/2
Fs/2
Fs/TDIF
Fs/AES
INPUT
SELECTOR
4
44
4
DATA
x 1 x 2
OUTPUTS DIGITAL I/O ( TDIF-1 )
1-2
3-4
5-6
7-8
(STD FS) (HI FS)
PLL
1-2
3-4
5-6
7-8