- 17 -

DV-B420 Digital Terrestrial Receiver

- 16 -

DV-B420 Digital Terrestrial Receiver
Setting up Your System

Sound Track

When you want to change the Audio output (stereo, mono, right, left), press the
SOUND( ) button.
Use the CH+/CH- buttons on the Remote Control Unit to select the audio language
you want.
Use the LEFT/RIGHT buttons on the Remote Control Unit to select the sound type
(Stereo, Mono, Left, Right).
EXIT button : Exit this menu
Dolby digital AC3 may be available. When selected no sound may be heard on the TV. This
feature in only avialable with fibre-optic cable from set top box to Dolby digital amplifier.
Note : Broadcasters may/may not have Dolby audio availble

Volume Control / Mute

Press the VOL+/VOL- buttons to control the volume.
To temporarily stop the volume, press the MUTE button.
To cancel mute, press the MUTE button again or press the VOL+/VOL- buttons.
Basic Function

Information Screen

After the television channels have been programmed, you will see the information(banner)
box each time you switch channels.
Logical Channel Number
Channel Name Network Name Parental Rating
Signal Quality
Now & Next Information
Dolby avialable
appears when
selection is possible
Category Day/Time
Indicator
Setting up Your System

Channel (Service) Change

1. Press the numeric buttons (0~9) on the remote control to select the channel no.
you want.
2. Press the OK button on the Remote Control Unit and select the channel you want from
the Channel List.
3. Press the CH+/CH- buttons on the Remote Control Unit to select the channel you want.
Sound
available Subtitle
available
Teletext
available
Signal Quality
Banner 1
Banner 2
Dolby available
Eng STEREO
Eng AC3 STEREO