Erase or Unfinalize a CD-RW

14

3 2 2

It is possible to erase the last recorded track. It is also possible to erase a whole disc.

Erase procedures are possible only on an unfinallized CD-RW disc. If a CD-RW disc has been finalized, unfinalize it prior to erasure. Remember that it is not possible to perform any erase or unfinalize procedures on a CD-R disc.

1Press the CD button to select “CD”.

2Load a recorded CD-RW.

3Press the ERASE button in the stop mode.

“Un FIn” (unfinalize) appears when a finalized disc is loaded.

“Er” and the last track number appear when the disc hasn’t been finalized. Press it again. “Er ALL” will be displayed.

“Un FINAL” (finalized discs only)

Select this to unfinalize a disc.

“Er” and the number of the last track recorded on the disc Select this to erase the last track on the disc.

<This will not appear when only one track is recorded on the disc.

Er ALL

Select this to erase all the tracks.

<To erase a number in a finalized CD-RW, unfinalize (Un FINAL) first and then erase the number by the same procedure (Er or Er All).

<To cancel the erasing or unfinalizing process, press the STOP button (H).

4Press the PLAY button (y) to start erasing or unfinalizing.

The remaining time for the operation appears in the display. When the operation has been finished, the display returns to the track/time display.

During erasing/unfinalizing, no buttons will work. Never turn the power off nor unplug the power cord.

<This operation cannot be undone. If you are going to erase a track or tracks, make sure that they are recordings that you really want to erase.

27