7Press the PLAY/PAUSE button (y/J) to start recording.

The red indicator on the RECORD button blinks during recording.

When the playback of the source finishes, press the STOP button (H) to stop recording.

When playback of a record finishes and the turntable stops rotating or playback of a cassette tape finishes, recording automatically ends.

But to prevent unwanted noise from the tone arm or cassette tape being recorded, stop the recording manually by using the STOP button as soon as the playback of numbers you want to record finishes.

When recording is stopped, “REC” and “-End-” blink for several seconds. Do not turn OFF the power or shake the unit during recording or when “REC” and “-----” are blinking. Such actions prevent proper recording.

ATo stop recording

Press the STOP button (H) to stop recording.

BTo pause recording

Press the PLAY/PAUSE button (y/J). “bUSY” briefly appears on the display, and the recording is paused.

To restart recording, press the PLAY/PAUSE button (y/J).

<You cannot restart recording while “bUSY” is displayed.

<Remember that every time recording is paused or stopped, a new track number will always be assigned. It is not possible to record in two “stages” within one track.

<The unit will not stop or pause even if the PLAY/PAUSE button is pressed within 10 seconds after recording has started.

CManual track division

It is possible to divide the recording into tracks while recording. While recording is taking place, press the TRACK INCREMENT button. The current track number will be incremented by one.

<The TRACK INCREMENT button works regardless of the MANUAL/AUTO REC setting.

<You cannot divide the track manually to make a track of less than 10 seconds. Up to 99 tracks can be made on a disc depending on the CD specifications.

<When the TRACK INCREMENT button is pressed while recording, the recorded sound will be cut for a moment.

27

ENGLISH