Erase or Unfinalize a CD-RW

1 3

4

It is possible to erase the last recorded track. It is also possible to erase a whole disc.

Erase procedures are possible only on an unfinallized CD-RW disc. If a CD-RW disc has been finalized, unfinalize it prior to erasure. Remember that it is not possible to perform any erase or unfinalize procedures on a CD-R disc.

1Press the CD button to select “CD”.

2Load a recorded CD-RW.

22

3Press the FINALIZE/ERASE button in the stop mode.

“UnFINAL” (unfinalize) appears when a finalized disc is loaded.

“ErASE” and the last track number appear when the disc hasn’t been finalized.

Each time the FINALIZE/ERASE button is pressed, the display changes as follows:

UNFINAL

Select this to unfinalize the disc.

ErASE XX (the number of the last track recorded on the disc)

Select this to erase the last track on the disc.

<This will not appear when only one track is recorded on the disc.

ErASE ALL

Select this to erase all the tracks.

<To cancel the erasing or unfinalizing process, press the STOP button (H).

4Press the ENTER/MEMORY button to start erasing or unfinalizing.

The remaining time for the operation appears in the display. When the operation has been finished, the display returns to the track/time display.

During erasing/unfinalizing, no buttons will work.

Never turn the power off nor unplug the power cord.

<This operation cannot be undone. If you are going to erase a track or tracks, make sure that they are recordings that you really want to erase.

ENGLISH

25